Quick Answer: How do you draw a line at an angle to another line in AutoCAD?

How do you draw a line perpendicular to another line in Autocad?

Creating Perpendicular Lines

1. Click Home tab Draw panel Line drop-down Create Line Perpendicular From Point . …
2. Select the arc or line object to extend the line from.
3. Specify the point on the object where the line will extend from.
4. Specify a distance by either clicking in the drawing or entering a distance.

How do you draw a 90 angle *?

Construction of angle 90-degree (90°)

1. Draw a line segment OA.
2. Taking O as center and using a compass draw an arc of some radius, that cuts OA at B.
3. Taking B as center and with the same radius draw another arc, that cuts the first arc at C.
4. Taking C as center and with same radius draw an arc, that cuts the first arc at D.

How do I draw a line in AutoCAD?

Step 1: For creating an object, take a line command. Step 2: Specify the first point. Step 3: Give direction in which you want to draw a line, give length, then press Enter key. Step 4: Don’t exit from line command.

How do you draw a crossed line in AutoCAD?

To Draw Lines

1. Click Home tab > Draw panel > Line. Find.
2. Specify the start point and end point of the line segment by clicking in the drawing area.
3. Continue specifying additional line segments. …
4. Press Enter or Esc when done or enter c to close a series of line segments.

How do you make a 45 degree angle?

We can draw a 45-degree angle by using the following steps:

1. Step 1: Draw a line segment OB.
2. Step 2: Place the protractor at point O.
3. Step 3: In the outer circle of the protractor, look for 45 degrees reading, and with a pencil mark a dot and name it A.
4. Step 4: Join O and A now. Angle ∠AOB = 45°.

How do you construct a perpendicular angle?

Construction of Perpendicular Lines Brief



The first step to construct the line segment is that draw the line segment for the given measurement. Then mark the point on the line and place the compass on the given point. Now draw the arc across the given line on each side. Without adjusting the compass, draw another arc.