Quick Answer: How do I create a projected view in Solidworks?

What is a projected view type in Solidworks?

Projected views are created by folding off an existing view in one of eight possible projections. The resulting view orientation is affected by the setting of First angle or Third angle projection as defined in the drawing sheet properties.

Can you create a custom view in Solidworks?

Creating a Custom View



Use the Rotate, Zoom, and Pan commands to create the desired view. In drawings, you can use the 3D Drawing View tool to create the desired view for another model view. Press the spacebar to open the Orientation dialog box. Type a name in the dialog box and click OK.

How do I create a detail view in Solidworks?

To create a detail view:

1. Click Detail View. (Drawing toolbar), or click Insert > Drawing View > Detail.
2. The Detail View PropertyManager appears and the Circle tool. is active.
3. Sketch a circle. …
4. When the view is where you want it to be, click to place the view.

How do you draw a project in Solidworks?

Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.

How do you make an isometric view in Solidworks?

To change the orientation of a section or aligned section view to isometric: Right-click a section or aligned section view and select Isometric Section View. To remove the isometric orientation, right-click the view and select Remove Isometric View.

How do I align a section view in Solidworks?

You can pre-select sketch entities that belong to the drawing sheet to create aligned section views. The sketch entities do not have to belong to an existing drawing view. To create an aligned section view: Click Aligned Section View on the Drawing toolbar, or click Insert, Drawing View, Aligned Section.

How do I change the home view in Solidworks?

Changing the Orientation of the Standard Model Views

1. Do one of the following: Use the Rotate, Zoom, and Pan tools to orient the model. Click View Selector and select a view. …
2. Click Update Standard Views .
3. When prompted, select the standard view you want to assign the current view to.
4. Click Yes to confirm the update.

How do I view 2D in Solidworks?

How to make a 2D drawing in SOLIDWORKS

1. If the part/assembly is open, select Make Drawing from Part/Assembly in the New flyout menu. …
2. Select Drawing to use a default template.
3. Click OK.
4. Select a sheet size and format.
5. Select a standard view orientation.
6. Begin a SOLIDWORKS 2D drawing.

How do you create a detail view?

Creating a Detail View / Detail View Profile

1. In the Drawing window, click Detail View in the Views toolbar ( Details sub-toolbar). …
2. Click the callout center. …
3. Drag to select the callout radius and click a point to end the selection. …
4. Click to generate the detail view.

How do you do a detail view?

See Import/Link Overview.

1. Do one of the following to activate the view creation tool: …
2. From the Type Selector, select Detail View: Detail.
3. On the Options Bar, select an appropriate detail scale.
4. To reference another detail or drafting view, on the Options Bar, click Reference other view, and select a view from the list.

How do I create an ordinate dimension in Solidworks?

To create ordinate dimensions:

1. Click Ordinate Dimension on the Dimensions/Relations toolbar, or click Tools, Dimensions, Ordinate. …
2. Click the first item (edge, vertex, and so on) from which all others will be measured to be the base (the 0.0 dimension), and click again to place the dimension outside the model.

How do you create a section view in SolidWorks drawing?

To create a section view manually:

1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
3. Sketch a section line. …
4. Click to place the view.

How do you move a drawing view in SolidWorks?

To move a drawing view, use one of the following methods:

1. Click and drag an entity (including edges, vertices, cosmetic threads, and so on). …
2. Select a drawing view, then move (nudge) it with the arrow keys. …
3. Press Alt, place the pointer anywhere in the view, and drag the view.

How do you move a drawing view?

Select a drawing view, then move (nudge) it with the arrow keys. You can set the arrow key increments. Press Alt, place the pointer anywhere in the view, and drag the view.