Question: What is use of revolve feature in Solidworks?

What is revolve command in SolidWorks?

To create a revolve feature: Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.

What is use of revolve feature?

About the Revolve Feature. Revolve is a method of defining three-dimensional geometry by revolving a sketched section around a centerline. Use the Revolve tool to create a solid or surface feature, and to add or remove material.

How do you use revolve surface in SolidWorks?

To create a revolved surface:

1. Sketch a profile and a centerline around which to revolve the profile.
2. Click Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.
3. Set the PropertyManager options.
4. Click OK .

How do you use revolve Extrude in SolidWorks?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you use revolve cut?

Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Extrude or Revolve PropertyManager.

What is revolve tool?

ℹ️ This tool is available to all users. You can create solids such as sphere, cylinders, and cones by revolving faces or closed sketches with the Revolve tool. Not only that, but you can also create helical objects by adding height to your revolved sketch or face.

What is extrude in Creo?

About the Extrude Feature. Extrusion is a method of defining three-dimensional geometry by translating a two-dimensional sketch normal to the sketch plane, for a pre-defined distance or up to a specified reference. Use the Extrude tool to create a solid or surface feature, and to add or remove material.

What is revolved boss base?

Revolved Boss or Base is a SolidWorks feature tool which is used to create solid 3D model around an axis. You can revolve the sketch around an axis to add materials to it. You can access revolved boss/base from both command manager and menubar.

How do you do a surface sweep in Solidworks?

Click Swept Surface (Surfaces toolbar) or Insert > Surface > Sweep. Set the PropertyManager options. Click OK .

What is loft in SolidWorks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

What is fillet in SolidWorks?

Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of a face, selected sets of faces, selected edges, or edge loops.

What features were used to create the chisel?

What features were used to create the chisel? Loft and flex.