Question: How do you edit geometry in Revit?

How do I edit a shape in Revit?

Modify the Shape of a Roof or Structural Floor

  1. Select the floor or roof to modify.
  2. Click Modify | Floors tab Shape Editing panel Modify Sub Elements. …
  3. Drag a point or edge to modify the location or elevation. …
  4. Click the text control to enter a precise height value for the selected point or edge.

How do you edit parts in Revit?

Edit a Part Division

  1. Select one of the parts that resulted from dividing a larger part.
  2. Click Modify | Parts tab Part panel (Edit Division). The original part displays in light blue and the division lines in green.
  3. In this edit mode, you can do the following: …
  4. Click (Finish) to exit the edit mode.

How do you edit extrusions?

Edit an Extrusion

  1. In the drawing area, select the extrusion.
  2. If you are in the project environment: …
  3. Click Modify | Extrusion tab Mode panel (Edit Extrusion).
  4. If desired, modify the extrusion profile.
  5. On the Properties palette, change the visibility, material, or subcategory of the extrusion, if desired.
IT IS INTERESTING:  You asked: How do you show bearings in Autocad?

How do you cut a geometry wall in Revit?

On the Modify ribbon, in the Geometry panel, click Cut Geometry. Revit prompts you to select the geometry to be cut. Click to select the wall. Then Revit prompts you to select the void geometry to cut.

How do you edit a roof in Revit?

Modify a Roof

  1. Select the roof, and click Modify | Roofs tab Mode panel (Edit Footprint) or (Edit Profile).
  2. Make necessary changes. …
  3. Click (Finish Edit Mode).

Where is the modify sub elements Revit?

You can use the Modify Sub Elements tool to manipulate one or more of the points or edges on a selected floor or roof. Select the floor or roof to modify. Click Modify | Floors tab Shape Editing panel Modify Sub Elements.

How do you draw shapes in Revit?

Sketch a Rectangle

  1. Select a tool that allows for a rectangle. …
  2. Click Modify | Place Lines tab (or respective Modify | Place tab or Modify | Create tab) Draw panel (Rectangle).
  3. On the Options Bar: …
  4. Click in the drawing area to specify the first corner of the rectangle.

How do you divide in Revit?

Divide a Path

  1. Open an existing conceptual design, or create a new one.
  2. In the drawing area, select a model line, reference line, or form edge on which repeated adaptive components will be placed.
  3. Click Modify | Lines tab Divide panel (Divide Path). Divided model line. Divided form edge.

How do you edit extrusions in Revit?

Edit an Extrusion

  1. In the drawing area, select the extrusion.
  2. If you are in the project environment: …
  3. Click Modify | Extrusion tab Mode panel (Edit Extrusion).
  4. If desired, modify the extrusion profile.
  5. On the Properties palette, change the visibility, material, or subcategory of the extrusion, if desired.

How do you model extrusions in Revit?

Create an Extrusion

  1. In the Family Editor, on the Create tab Forms panel, do one of the following: …
  2. Use the sketching tools to sketch the extrusion profile: …
  3. On the Properties palette, specify the extrusion properties: …
  4. Click Modify | Create Extrusion tab Mode panel (Finish Edit Mode). …
  5. To view the extrusion, open a 3D view.

How do you edit extrudes in Fusion 360?

Go to the left menus and drop down the sketch and right click the sketch and select edit. That will take the extrusion away and allow you to edit.

How do you subtract Geometry in Revit?

Cut form geometry with a solid form. When you use a solid to cut geometry, the overlapping area is removed and the abutting solids remain.



Family instances inside of the massing editor.

  1. Create two adjacent solid forms. …
  2. Click Modify tab Geometry panel (Cut).
  3. Select the solid form to be cut.
  4. Select the cutting solid form.

How do you cut an object in Revit?

When selecting an element that needs to be trimmed to form the corner, make sure you click the part of the element to be retained. click Modify tab Modify panel Trim drop-down (Trim/Extend Single Element). Select the reference to use as a boundary. Then select the element to trim or extend.

IT IS INTERESTING:  How do I import DWG files into SmartDraw?
Special Project