Question: How do you cut a circle in Solidworks?

How do you cut a shape in SolidWorks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

How do you cut a circle in half in SolidWorks?

Select trim tool and click on “trim to closest”. Than click on the left or right side of the circle (directly to the line) to get a half circle.

How do you split an arc into equal parts in SolidWorks?

You can use the Segment tool to create equal length segments in arcs and circles. In an open sketch of an arc or circle, click Segment (Sketch toolbar) or Tools > Sketch Tools > Segment . In the PropertyManager, under Segment Parameters, select Sketch segments.

How do you cut a line in SolidWorks?

To cut a feature:

1. Edit a sketch.
2. Select the sketch entities required for the feature. …
3. Hold Ctrl and select a face to be the starting point for the cut.
4. Click Convert to Cut (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Cut, and click in the graphics area to establish the direction of the cut.

How do I cut part of a SolidWorks assembly?

To create an assembly feature cut:

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you make a semi circle in Inventor?

How to make a sphere in Autodesk Inventor?

1. Next in the sketch environment draw a half circle. …
2. When you are done click finish sketch.
3. Then click Revolve in the Model Tab.
4. The profile to be revolved should be automatically selected. …
5. Click on the line to select it as an axis and a preview of the revolved solid is displayed.

How do you divide an arch?

Existing Method



1, the arc AB is divided into two parts by dividing the chord AB in two equal parts as Aa and aB, then locating C on the arc by drawing a perpendicular to AB at its midpoint a, and then extending the perpendicular to intersect the arc AB at C.

How do you trim entities?

You can use Power trim to trim multiple, adjacent sketch entities by dragging the pointer across each sketch entity. You can use Power trim to extend sketch entities along their natural paths. Extends or trims two sketch entities until they intersect at a virtual corner.

How do you trim a 3D object in SolidWorks?

To trim a 3D sketch:

1. Start the 3D sketch on a 2D plane.
2. Then do either of the following: Right-click and select 3D sketch on a plane. Double-click a plane or sketch entity. You can use any of the following trim options: Power trim. Corner. Trim away inside. Trim away outside. Trim to closest.