Question: How do I add more views to a Solidworks drawing?

How do you add multiple views to a SolidWorks drawing?

In the Model View PropertyManager:

1. Under Part/Assembly to Insert, in Open documents, select a document, or click Browse to locate a document.
2. Click. .
3. Under Orientation, select Create multiple views and click *Front, *Top, and *Right. (You can also select annotation views.)
4. Click. .

How do I add a view in SolidWorks?

To add a custom named view to the Orientation dialog box:

1. Use the Rotate, Zoom, and Pan commands to create the desired view. …
2. Press the spacebar to open the Orientation dialog box.
3. In the dialog box, click New View .
4. Type a name in the dialog box and click OK.

How do I add a view layout in SolidWorks drawing?

To create a layout:

1. In the graphics area, select a drawing view.
2. Click Sheets > Layouts or View > Create Layout. The graphics area now shows only the selected view. Layout1 appears on the Sheets pane as the active layout.
3. Add views by dragging and dropping them to the layout.

How do you make a 3 view drawing in SolidWorks?

To create the Standard 3 View by the standard method:

1. In a drawing, click Standard 3 View. (Drawing toolbar), or click Insert > Drawing View > Standard 3 View. …
2. Select the model in one of these ways: Select a model from Open documents in the Standard 3 View PropertyManager or browse to a model file and click.

What is an auxiliary view in Solidworks?

An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view. You can use sketched lines for folding.

How do I create an isometric view in Solidworks?

To change the orientation of a section or aligned section view to isometric: Right-click a section or aligned section view and select Isometric Section View. To remove the isometric orientation, right-click the view and select Remove Isometric View.

How do I save a 3D view in Solidworks?

At the bottom of the SOLIDWORKS window, on the 3D Views tab, click Capture 3D View. Click Capture 3D View (MBD CommandManager or toolbar).

How do you rotate an isometric view in Solidworks?

To rotate a drawing view around its center point:

1. Click Rotate View. (View toolbar), or right-click the view and select Zoom/Pan/Rotate > Rotate View. …
2. Do one of the following: Drag the view to the desired rotation. …
3. Set options, then click Apply: …
4. Click Close to close the dialog box.

How do you do a cutaway view in SOLIDWORKS?

To create a part cutaway view:

1. In the part: Create a new configuration for the cutaway view. Cut the part as it should appear in the drawing view. …
2. In the drawing: Create a model view of the part using the configuration you made for the cutaway. Add cross hatching to the cut faces.

How do you do a cross section view in SOLIDWORKS?

To create a section view:

1. In a part or assembly document, click Section View. (View toolbar) or View > Display > Section View.
2. In the Section View PropertyManager, under Section 1, set the properties.
3. To section the model with additional planes or faces, select Section 2 and Section 3 and set the properties. …
4. Click .

How do I align a section view in SOLIDWORKS?

You can pre-select sketch entities that belong to the drawing sheet to create aligned section views. The sketch entities do not have to belong to an existing drawing view. To create an aligned section view: Click Aligned Section View on the Drawing toolbar, or click Insert, Drawing View, Aligned Section.

What are the three views in SOLIDWORKS?

The Standard 3 View option under Insert > Drawing View creates three related default orthographic (front, right, left, top, bottom, and back) views of a part or assembly displayed at the same time. The view orientations used are based on the orientations (Front, Right, and Top) in the part or assembly.

What are the three standard views we show on your drawings?

Although six different sides can be drawn, usually three views of a drawing give enough information to make a three-dimensional object. These views are known as front view, top view and end view.

What are the standard three views in a drawing?

Standard views typically include the 3 principle views – front, top, right side. There are several methods for generating the standard drawing views.