How do you use Toposurface in Revit?

How do you add topography in Revit?

In Revit, link the topography to the current model as follows:

1. Specify coordinates for the building model. …
2. Open a plan view or a 3D view for the building model. …
3. Click Insert tab Link panel (Link Topography).
4. In the Link Topography dialog, navigate to the topography. …
5. Select the desired topography, and click Link.

How do you add thickness to topography in Revit?

To create the thickness you either create a copy of the 3D view or work in the default 3D view. 2. You then switch on the section box in view properties dialog. slightly into your 3D surface until you see you Topography Cut pattern appears.

Where are Revit site settings?

To access the Site Settings dialog, click the dialog launcher on the Model Sight panel. In the Site Settings dialog, you can modify the contour line display by adding contours. To do this, click Insert. Change the Start, Stop, and Increments values and select the desired Range Type and Subcategory.

How do you edit a pad in Revit?

Modify Building Pads

1. Open the site plan that contains the building pad.
2. Select the building pad. …
3. Click Modify | Pads tab Mode panel (Edit Boundary).
4. Click Modify | Pads Edit Boundary tab Draw panel (Boundary Line, and use the sketch tools to make the necessary changes.
5. To slope the building pad, use a slope arrow.

What elevation is Poche base Revit?

Elevation of poche base. Controls the depth of the cross-section of earth (for example, –30 feet or –25 meters). This value controls the poche depth for all topography elements in your project. Property Data.

How do you split a surface in Revit?

SPLIT TOPOSURFACE

1. Open a site plan or 3D view.
2. Click Massing & Site tab -> Modify Site panel -> Split Surface.
3. In the drawing area, select the toposurface to split.
4. Revit Architecture enters sketch mode.
5. Click Split Surface tab -> Draw panel -> Use sketch tools to split the toposurface.