How do you use the horizontal ordinate dimension in Solidworks?

How do you add a horizontal ordinate dimension in Solidworks?

To add more dimensions along the same ordinate:

1. Right-click an ordinate dimension, and select Add To Ordinate.
2. Click the edges, or vertices, or arcs you want to dimension using the same ordinate. …
3. Select another mode or another tool or press Esc to exit from the ordinate mode.

How do you use vertical ordinate dimension in Solidworks?

Creating Vertical Ordinate Dimensions

1. With a drawing or sketch active, click Vertical Ordinate Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Vertical Ordinate.
2. Click the first item from which all others will be measured, and click again to place the dimension.
3. Click an item to dimension.

How do you use smart dimension in Solidworks?

To add a dimension to a sketch or drawing:

1. Click Smart Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart. …
2. Select the items to dimension, as shown in the table below. You can undo previous selections by pressing Esc. …
3. Click to place the dimension. To dimension the…

What is ordinate dimension?

Ordinate dimensions are a set of dimensions measured from a zero ordinate in a drawing or sketch. In drawings, they are reference dimensions and you cannot change their values or use the values to drive the model. Ordinate dimensions are measured from the axis you select first.

How do you add dimensions to a Solidworks drawing?

You can specify that dimensions marked for drawings be inserted automatically into new drawing views. Go to Tools > Options and in the Document Properties tab, click Detailing. Select Dimensions marked for drawing under Auto insert on view creation.

How do you run a dimension in Solidworks?

You can right-click an extension line and select Display Options > Jog to jog linear dimension extension lines. To create a jog in a dimension extension line: Right-click a dimension extension line and select Display Options > Jog .

How do you show coordinates in Solidworks drawing?

To hide or show individual coordinate systems: Right-click the coordinate system and click Hide or Show.
…
Click one of the following:

1. Hide/Show Items (Heads-up View toolbar), and then View Coordinate Systems.
2. View Coordinate Systems (View toolbar)
3. View > Hide/Show > Coordinate Systems.

How do I create a template in Solidworks?

To create a template:

1. Click New (Standard toolbar) or File > New.
2. Double-click the type of template that you want to create: Part, Assembly, or Drawing.
3. Click Options. …
4. On the Document Properties tab, select options to customize your new document template, then click OK. …
5. Click File > Save As.

How do you make a horizontal drawing in SOLIDWORKS?

Creating Horizontal Dimensions

1. In an open sketch, click Horizontal Dimension. (Dimensions/Relations toolbar) or Tools > Dimensions > Horizontal. …
2. Select the two entities to dimension. You can undo previous selections by pressing Esc. …
3. Set the value in the Modify box and click .
4. Click a location to place the dimension.

How do you add a dimension to a SOLIDWORKS 3D object?

Double-click one 3D sketch plane to make it active. Right-click on the edge of the 3D sketch plane to which you want to dimension, and select Smart Dimension. With the second plane selected, click inside the active plane to add the dimension.

How do I change dimension units in SOLIDWORKS?

In the application, you can change these settings for individual documents and for your document templates.

1. Unit system for individual documents, go to Tools > Options > Document Properties > Units.
2. Dimension standard for individual documents, go to Tools > Options > Document Properties > Detailing.

How do you use ordinate dimension?

To Create an Ordinate Dimension

1. Move the UCS origin to the datum.
2. Click Annotate tab Dimensions panel Dimension. Find.
3. At the prompt, enter o (Ordinate).
4. If you do not want jogs in the ordinate leaders, turn on Ortho mode [F8].
5. Specify a point for the feature location.
6. Specify a leader endpoint.

What is the use of ordinate dimensioning and where it is used with example?

Ordinate dimensioning is used when the X and the Y coordinates, from one location, are the only dimensions necessary. Usually the part has a uniform thickness, such as a flat plate with holes drilled into it. The dimensions to each feature, such as a hole, originate from one datum location.

Which command is used to create ordinate dimensions?

The OrdinateDimension command creates ordinate point Dimensions. The command displays an X or Y coordinate with a Leader line to create X-datum or Y-datum dimensioning. The value of the X or Y coordinate is defined by the point you specify, called the feature location.