How do you use offset Assembly in Civil 3d?

How do you offset in Civil 3D?

Click Home tab Create Design panel Feature Line drop-down Create Feature Line From Stepped Offset Find. Do one of the following to specify the location for the offset: Specify the offset distance, then select the object to offset. Enter Through, then select the object to offset and select a through point.

How do I change offset alignment in Civil 3D?

To edit offset alignments using the Edit Offsets command



In the drawing, click the intersection object. On the ribbon, click Edit Offsets Find on the Modify panel of the Intersection contextual tab. In the drawing, right-click the intersection object, and then select Edit Offset Parameters from the object context menu.

How do I add assembly to alignment in Civil 3D?

To automatically add assemblies at offset geometry points using command settings

1. In Toolspace, click the Settings tab.
2. Expand Corridor Commands.
3. Right-click CreateCorridor, and click Edit Command Settings. …
4. Set the Value field for the Offset Target Geometry Points to Yes to enable this option.
5. Click Apply or OK.

What is offset alignment?

Offset misalignment, sometimes referred to as parallel misalignment, is the distance between the shaft centers of rotation measured at the plane of power transmission. This is typically measured at the coupling center.

How do I create assembly in CAD?

In the Write Block dialog box, select Objects. Click Select Objects. In the drawing, select the objects that make up the assembly.

…

To create and use assemblies

1. In the Name list, click the assembly you just created, or click Browse to locate the drawing.
2. In the lower-left corner, select Explode.
3. Click OK.

How do I open alignment layout tools in Civil 3D?

To Create an Alignment Using the Alignment Layout Tools

1. Click Home tab Create Design panel Alignment drop-down Alignment Creation Tools Find.
2. In the Create Alignment – Layout dialog box, enter a unique name for the alignment.
3. Specify the alignment Type.
4. Enter an optional description.
5. Enter a starting station value.

How do you create a best fit profile in Civil 3D?

Click Home tab Create Design panel Profile drop-down Create Best Fit Profile Find . In the Create Best Fit Profile dialog box, under Input Data, specify the type of data from which to create the best fit alignment.