How do you ungroup in Revit 2021?

Where is option in Revit 2021?

The Options Bar is located below the ribbon. It displays conditional tools dependent on the current tool or selected element. To move the Options Bar to the bottom of the Revit window (above the status bar), right-click the Options Bar, and click Dock at bottom.

How do I create a group in Revit 2021?

Create a Group Using the Group Editor

1. Click Architecture tab Model panel Model Group drop-down (Create Group). …
2. In the Create Group dialog, enter a name for the group.
3. Select the type of group to create (model or detail), and click OK.

How do I force Revinquish Revit 2021?

Follow these steps:

1. Start Revit or close any open projects.
2. Click R menu (or File menu) > Options.
3. On the General tab of the Options dialog box: …
4. Create new local file (File > Open > select the central file).
5. Click Collaborate tab on the ribbon > Relinquish All Mine.
6. Close the project.

How do you make a model in Revit 2021?

Create an In-Place Element

1. Open a project.
2. On the ribbon, click (Model In-Place). …
3. In the Family Category and Parameters dialog, select a category for the element, and click OK. …
4. In the Name dialog, type a name, and click OK. …
5. Use the Family Editor tools to create the in-place element.

How do I turn off design options in Revit?

Click Manage tab Design Options panel (Design Options). If you are currently editing a design option, click Finish Editing. In the Design Options dialog, select the design option to delete.

How do you ungroup in Revit?

Ungroup Elements

1. In the drawing area, select a group.
2. Click Modify | Model Groups tab Ungroup.

How do you delete groups in Revit?

Delete Groups

1. In the Project Browser, right-click the group, and click Select All Instances In Entire Project.
2. Click Modify | <group type> Groups tab Modify panel (Delete), or press Delete . All instances of the group are deleted in the project.
3. In the Project Browser, right-click the group, and click Delete.

How do I turn off model groups in Revit?

In the drawing area, select a model group that has an attached detail group, or groups. Click Modify | Model Groups tab Group panel (Attached Detail Groups). In the Attached Detail Group Placement dialog, select or clear check boxes to show or hide the attached detail group. Click OK.

How do I remove a Revit model from Central?

Disable Worksharing

1. Click File tab Open.
2. Select a workshared model.
3. In the Open dialog, select Detach from Central.
4. Click Open. The default file name for the model is the original filename with “_detached” appended. …
5. In the task dialog, specify whether to preserve or discard worksets. …
6. Save the model.

How do I delete a borrower in Revit?

Start Revit and close any open project. Click the File tab > Options.
…
Notes:

1. Create a new local file (using the newly changed username).
2. Synchronize the new local file with the central model.
3. Use the Relinquish All Mine command (on the Collaborate Ribbon Tab).
4. Close the local model.

How do you check out worksets in Revit?

To check out a workset, make it editable. Note: To edit an element or a workset, it must be up-to-date. If you attempt to edit an element or a workset that is not up-to-date, you are prompted to update your local copy of the central model, so that you have all of the latest changes.

How do you cut a model in Revit?

Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK. Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry).

How do you edit a model in Revit?

Basic Mass Editing: Changing the profile

1. Select the mass, then click ‘Edit In-Place’.
2. Tab to select the extrusion (by default Revit will select the face /edge first but tabbing will allow you to select the solid).
3. Click ‘Edit Profile’.
4. Select the top or bottom surface (tab if necessary).

How do I edit a model in Revit?

Select the in-place element in the drawing. Click Modify | <Element> tab Model panel (Edit In-Place).
…
Open the Family Editor

1. On the ribbon, click (Model In-Place). …
2. In the Family Category and Parameters dialog, select the family category, and click OK.