How do you trim in Solidworks?

How do you trim an object in Solidworks?

To trim a surface:

1. Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face.
2. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.
3. In the PropertyManager, under Trim Type, select a type:

How do you cut edges in Solidworks?

To create a corner-trim:

1. Create a sheet metal part.
2. Click Corner-Trim. (Sheet Metal toolbar) or click Insert > Sheet Metal > Corner Trim.
3. In the Corner-Trim PropertyManager, set the following under Relief Options: Select edges for Corner edges . Click Collect all corners. Select a value for Relief Type. …
4. Click .

What is trim entity solidworks?

Trims open sketch entities outside of two bounding entities. Trimming with Trim to Closest. Trimming a 3D Sketch. Trim PropertyManager. You can use the Trim PropertyManager to select a trim type and control other trimming options.

Where are trim entities solidworks?

Click Trim Entities on the Sketch toolbar, or click Tools, Sketch Tools, Trim. In the PropertyManager, under Options, select Trim away outside . Select two bounding sketch entities. Select the sketch entities to trim.

How do I trim a solid part in Solidworks?

Surface Cut

1. Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. …
2. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface.
3. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies.

How do you trim intersecting solids in Solidworks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

How do you cut a part in assembly in Solidworks?

1 Answer

1. In the assembly, click Edit Component for the part to be cut.
2. Insert – Feature – Cavity.
3. Select the part that you wish to do the cutting with.
4. Hide the cutting tool if necessary. You can’t suppress or delete it, as the cavity feature is referencing it.

How do you cut a 2D shape in Solidworks?

To cut a feature:

1. Edit a sketch.
2. Select the sketch entities required for the feature. …
3. Hold Ctrl and select a face to be the starting point for the cut.
4. Click Cut (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Cut, and click in the graphics area to establish the direction of the cut.

What is the use of trim entities *?

The Trim Entities tool is mainly used for removing unwanted parts or portions from your design sketch.

How do I trim in Solidworks 2017?

Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim. In the PropertyManager, under Trim Type, select a type: Standard. Trims surfaces using surfaces, sketch entities, curves, planes, and so on.

How do you make a circular pattern in Solidworks?

To create circular sketch patterns:

1. In an open sketch, click Circular Sketch Pattern (Sketch toolbar) or Tools > Sketch Tools > Circular Pattern.
2. In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern .
3. Under Parameters: Click Reverse direction . …
4. Click .