How do you trim an extrusion in AutoCAD?

How do I cut extrude in AutoCAD 2021?

To Create a 3D Solid by Extruding

1. If necessary, on the status bar click Workspace Switching and select 3D Modeling. Find.
2. Click Solid tab > Solid panel > Extrude. Find.
3. Select the objects or edge subobjects to extrude.
4. Specify the height.

How do I enable trim in AutoCAD?

To Trim an Object

1. Click Home tab Modify panel Trim. Find.
2. Select the objects to serve as cutting edges. Press Enter when you finish selecting the cutting edges. …
3. Select the objects to trim and press Enter a second time when you finish selecting the objects to trim.

What is the Presspull command doing in AutoCAD?

The Presspull command in AutoCAD 3D is used to create an area formed by the closed boundary. Or. It is used to pull an enclosed boundary. It can also be used to create a 3D solid in case of the selected circle or interior of the bounded area. The objects, such as arc, can be used to create a 3D surface.

What is difference between erase and TRIM in AutoCAD?

As verbs the difference between trim and erase



is that trim is to reduce slightly; to cut; especially, to remove excess; eg ‘trim a hedge’, ‘trim a beard’ the adposition of can be used in present perfect tense to designate the removed part while erase is to remove markings or information.

What is the use of TRIM command?

A trim command (known as TRIM in the ATA command set, and UNMAP in the SCSI command set) allows an operating system to inform a solid-state drive (SSD) which blocks of data are no longer considered to be ‘in use‘ and therefore can be erased internally. Trim was introduced soon after SSDs were introduced.

What are 3 important properties for any drawing object?

Object properties control the appearance and behavior of objects, and are used to organize a drawing. Every object has general properties including its layer, color, linetype, linetype scale, lineweight, transparency, and plot style. In addition, objects have properties that are specific to their type.

Why do we use TRIM in AutoCAD?

The Trim command in AutoCAD is used to remove the objects, which meet the edges of other objects. It is used to remove extra lines or extra parts of an object.

Why trim is not working in AutoCAD?

Check if the PICKADD variable is set to 2. If not you should set it to 2. Pre-select the elements and then call the TRIM command. Enter TRIM Command once in the command line and then hit enter again before using the TRIM.

What is the use of TRIM command and its shortcut key?

Trims objects to meet the edges of other objects. To trim objects, select the boundaries and press Enter. Then select the objects that you want to trim.

Which command is used to set limit in TRIM command?

At the Command prompt, enter limits. Enter the coordinates for a point at the lower-left corner of the grid limits. Enter the coordinates for a point at the upper-right corner of the grid limits. At the Command prompt, enter griddisplay, and enter a value of 0.