How do you sweep in Assembly in Solidworks?

Can you do a sweep in an assembly?

Sweep geometry in an active part in an assembly. You can create a sweep geometry in an activated part within an assembly by selecting a sketched curve or one or more sketch regions from any part. You can sweep the part using the Options Toolbar.

What is sweep command in Solidworks?

SWEEP is the one feature in Solidworks that helps sweep a closed profile along a closed or open path. In this session, we are going to use a simple 3D object as an exercise to demonstrate the use of the SWEEP command in Solidworks.

What is a guide curve in SolidWorks?

SolidWorks lofted boss base guide curve is additional feature which available in loft property manager. It helps to create 3D model between multiple profiles by guiding them using line or curve. If you are not given a curve or line as guide, it will simply adds material like normal loft command.

What is loft in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

How do you revolve in Solidworks?

Click one of the following revolve tools:

1. Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
2. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
3. Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.

How do you do a sweep?

Create a Sweep

1. In the Family Editor, on the Create tab Forms panel, do one of the following. …
2. Specify the sweep path: …
3. On the Mode panel, click (Finish Edit Mode).
4. Load or sketch a profile. …
5. On the Properties palette, specify the sweep properties. …
6. On the Mode panel, click (Finish Edit Mode).

How do you sweep along a path?

Create a Sweep Along a Path

1. Sketch a profile and path on intersecting planes. …
2. Click 3D Model tab Create panel Sweep . …
3. In the Sweep dialog box, click Profile and then select the profile to sweep. …
4. With the Path selection tool, select a 2D sketch, 3D sketch, or edges of geometry.

How do you sweep the boss base?

Set the PropertyManager options based on the sweep boss/base feature. To open this PropertyManager: Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model that you can specify as a path. Click Swept Boss/Base (Features toolbar).

How do you sweep a tube in SolidWorks?

To create a circular profile sweep:

1. In a part, click Insert > Cut > Sweep to cut a tube into the part.
2. In the PropertyManager, under Profile and Path, click Circular Profile.
3. In the graphics area, select a curved edge for Path. …
4. Click . …
5. Click Insert > Boss/Base > Sweep to add the solid rod.

Can you sweep a body in SolidWorks?

For cut sweeps only, you create a solid sweep by moving a tool body along a path. The path must be tangent within itself (no sharp corners) and begin at a point on or within the tool body profile.

…

Sweeps.