How do you sweep a model in Revit?

How do you sweep in Revit 2019?

To create a solid sweep, click (Sweep).

…

1. Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list. …
2. On the Options Bar, use the X, Y, Angle, and Flip options to adjust the position of the profile. …
3. Click Apply.
4. Select the path, and in a 3D view, zoom in to see the profile.

How do I edit a sweep profile in Revit?

To edit the existing profile, on the Sweep panel, click (Edit Profile), and use the tools on the Modify | Sweep > Edit Profile tab. On the Mode panel, click (Finish Edit Mode) to finish editing the profile and again to finish editing the sweep.

What is a sweep in Revit?

Jul 22 2021In-product view. Create a sweep form from a line and a 2D profile sketched perpendicular to the line. The line in the sweep defines the path along which the 2D profile is swept to create the 3D form. The profile consists of linework drawn perpendicular to the line or series of lines that define the path.

What are the two necessary elements to create a sweep?

Two elements are required to create a sweep surface: Trajectory—Curve or curves that guide the sweep. Cross-sectional sweep profile—Curve or curves that sweep along the trajectory. ◦ One or two trajectories can be used.

How do you blend in Revit?

To create a blend, select the blend command. You are placed in the Sketch mode. Select a tool from the Draw menu to draw a closed-loop sketch for the base of the blend. Once the base sketch is complete, click Edit Top on the Mode panel of the contextual tab.

How do you draw a spline in Revit?

Click Place Lines tab (or respective Place tab or Create tab) Draw panel (Spline), and place the cursor in the drawing area. Click to specify the start point for the spline. Move the cursor and click to specify the next control point on the spline. Repeat as necessary.

How do you modify a wall sweep?

Select a wall sweep in a 3D or elevation view, or click Architecture tab Build panel Wall drop-down (Wall: Sweep). On the Properties palette, click Edit Type, or click Modify | Place Sweep tab Properties panel Type Properties. In the Type Properties dialog, for Profile, select the desired profile type. Click OK.

How do you make a new wall sweep?

Add a Wall Sweep

1. Open a 3D or elevation view containing the wall to which you want to add the sweep.
2. Click Architecture tab Build panel Wall drop-down (Wall: Sweep).
3. In the Type Selector, select the desired type of wall sweep.