How do you save a plot in Solidworks?

How do I export a plot in Solidworks?

Click Plot Tools > Save As (Simulation CommandManager) Right-click in the graphics area, and select Save As.

…

Saving Result Plots

1. eDrawings Files (*. analysis. eprt) or eDrawings Files (*. analysis. …
2. Bitmap Files (*. bmp)
3. JPEG Files (*. jpg)
4. VRML Files (*. wrl)
5. PNG Files (*. png)

How do you plot in Solidworks?

Graphing Results on an Edge

1. Display the desired result plot in the graphics area.
2. In the Simulation study tree, right-click the plot icon and select Probe .
3. In the Probe Result PropertyManager, under Options, select On selected entities.
4. Under Results: …
5. Under Report Options, click Plot. …
6. Click to close the graph window.

How do you show a mesh plot in Solidworks?

To view a mesh sectioning plot superimposed on a result plot, right-click an active result plot and click Mesh Sectioning. In the Mesh Section PropertyManager, select a reference plane or cylinder for the orientation of the mesh section plane. You can dynamically position the mesh section plane in the graphics area.

How do you plot stress in Solidworks?

Plotting Principal Stresses

1. In the Simulation study tree, right-click the Results folder and select Define Stress Plot.
2. In the PropertyManager, under Display: Set Component to VON: von Mises stress. Select the desired Units .
3. Under Advanced Options: Select Show as tensor plot. …
4. Set other options and click .

How do you save a flow Simulation in Solidworks?

Saving Result Plots

1. In the Simulation study tree, right-click the active plot icon and select Save As.
2. Click Plot Tools > Save As (Simulation CommandManager)
3. Right-click in the graphics area, and select Save As.

How do I open Simulation in Solidworks?

To load all simulation data, click Simulation > Options > System Options > General and select Load all Simulation Studies when opening the model (requires more time to open a model). You can also load simulation data for a specific study by clicking individual simulation tabs.

Where is plot tools in Solidworks?

In the Simulation study tree, right-click the active plot icon and select Section Clipping or click Plot Tools (Simulation CommandManager) and select Section Clipping.

Where is results and plots solidworks?

The software generates a Results folder in the Simulation study tree after running a study successfully. The default plots in the Results folder depend on the study type and the options you set on the Default Options tab of the Options dialog box.

How do you find stress and strain in SolidWorks?

On the Properties tab, do the following:

1. Set Model Type to either Nonlinear Elastic, Plasticity – von Mises, or Plasticity – Tresca.
2. Select the desired Units.
3. Click Create Stress-Strain Curve. The Tables & Curves tab is active and Stress-Strain Curve is selected in Type.

What is stress vs strain?

Stress is the force applied to a material, divided by the material’s cross-sectional area. Strain is the deformation or displacement of material that results from an applied stress. Note: A material’s change in length (L – L) is sometimes represented as δ.