How do you rotate Extrude in SolidWorks?

Can you rotate a feature in Solidworks?

(Sketch toolbar) or Tools > Sketch Tools > Modify. In the dialog box, do one of the following: Type a value for Rotate to set the rotation value and press Enter.

What is extrude intrude?

An intrusion is any body of intrusive igneous rock, formed from magma that cools and solidifies within the crust of the planet. In contrast, an extrusion consists of extrusive rock, formed above the surface of the crust.

What is extruded boss in Solidworks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

What is extrude command in Solidworks?

Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction. When we run the Extruded Surface command, two things can happen: Either a sketch is active or preselected or no sketches exists.

How do you use the extrude tool in Solidworks?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears. Edit the properties in the Base Extrude PropertyManager.

How do I rotate a trackpad in SolidWorks?

Click Rotate View (View toolbar) or View > Modify > Rotate then drag the pointer . Drag with the middle mouse button. Press the arrow keys. Hold down Shift to rotate in 90° increments.

How do you rotate a camera in SolidWorks?

To rotate the camera: Do one of the following: Press Alt + left-click and drag. On the main toolbar, click Camera Tools > Rotate , then click and drag.

How do I change the orientation of an object in SolidWorks?

Select the top view from view orientation of “Heads-up View Toolbar” or press “ctrl+5” then click Update Standard View button and choose the front view. A pop-up message will show-up to confirm if you want to change the view, click yes. This feature is the easiest way to change the orientation of your part.