How do you rotate an entire assembly in Solidworks?

How do you rotate an assembly?

Rotate assembly components

1. To rotate in any direction, click inside the 3D rotate symbol and drag in the appropriate direction.
2. To rotate about the horizontal axis, click the top or bottom handle of the 3D rotate symbol and drag vertically.

How do you rotate a 90 degree assembly in Solidworks?

Using a Triad to Rotate a Component

1. To snap, right-click the selected ring and choose Snap while Dragging. …
2. To rotate in pre-set increments, right-click the selected ring and choose Rotate 90° or Rotate 180°.
3. To type specific increments, right-click the center sphere and select Show Rotate Delta XYZ Box.

How do you fix Assembly in Solidworks?

To fix or float an assembly component:

1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
2. Select Fix or Float.
3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.

How do I rotate a scene in Solidworks?

Click Rotate View (View toolbar) or View > Modify > Rotate then drag the pointer . Drag with the middle mouse button. Press the arrow keys. Hold down Shift to rotate in 90° increments.

How do you rotate a particular part in Solidworks?

Rotate Context Toolbar

1. In the Insert Component PropertyManager, under Options, select Show Rotate context toolbar.
2. Enter the number of degrees for the rotation.
3. Click , , or .
4. Click to place the component.

How do I change the position of a part in Solidworks assembly?

To edit a position:

1. In the FeatureManager design tree, select Mate Controller and click Edit Feature .
2. In the PropertyManager, under Mates Positions, select Position 2 from the list. The components move to Position 2.
3. Change the value of Distance1 from 30 to 60 . …
4. Click Update Position . …
5. Click .

How do you change a part in a Solidworks assembly?

To edit a part while in an assembly:

1. Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. …
2. Make the necessary changes to the part.

How do you ground Assembly in Solidworks?

Defining a Ground Plane

1. In an assembly, click Insert > Reference Geometry > Ground Plane.
2. In the PropertyManager, in Ground Plane, select a face in the assembly.
3. (Optional.) Click Reverse Direction , or click the handle in the graphics area.
4. Click . Ground Plane appears in the FeatureManager design tree.

How do you switch planes in solid edge?

Change the sketch plane X-axis orientation by doing any of the following:

1. Press the N key to move the green line counterclockwise to the next linear edge along the outside of the plane or face. …
2. Press the B key to move the green line in a clockwise direction to the previous linear edge.