How do you power trim in Solidworks?

How do you trim a 3D object in Solidworks?

To trim a 3D sketch:

1. Start the 3D sketch on a 2D plane.
2. Then do either of the following: Right-click and select 3D sketch on a plane. Double-click a plane or sketch entity. You can use any of the following trim options: Power trim. Corner. Trim away inside. Trim away outside. Trim to closest.

Where are trim entities solidworks?

Click Trim Entities on the Sketch toolbar, or click Tools, Sketch Tools, Trim. In the PropertyManager, under Options, select Trim away outside . Select two bounding sketch entities. Select the sketch entities to trim.

How do you split a sketch in Solidworks?

To split a sketch entity:

1. In an open sketch, click Split Entities. (Sketch toolbar) or Tools > Sketch Tools > Split Entities. …
2. Click the sketch entity at the location where you want the split to occur. The sketch entity splits into two entities, and a split point is added between the two sketch entities.

How do you cut intersecting parts in SolidWorks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

How do you trim entities?

You can use Power trim to trim multiple, adjacent sketch entities by dragging the pointer across each sketch entity. You can use Power trim to extend sketch entities along their natural paths. Extends or trims two sketch entities until they intersect at a virtual corner.

How do I trim in Solidworks 2017?

Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim. In the PropertyManager, under Trim Type, select a type: Standard. Trims surfaces using surfaces, sketch entities, curves, planes, and so on.

How do you cut a shape in Solidworks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

How do I cut a half sketch in SolidWorks?

(Drawing toolbar) or Insert > Drawing View > Section. In the Section View PropertyManager, click Section or Half Section. You can use Tab to switch between Cutting Lines in Section or Half Section. After you select and place the cutting line in the drawing view, the Section View popup displays.

How do you split a surface in SolidWorks?

You can split surfaces with the Split tool.

…

To split a surface:

1. Open install_dir sampleswhatsnewpartssplit. …
2. Click Split (Mold Tools toolbar) or Insert > Features > Split.
3. In the graphics area, select Surface-Extrude1 for Trimming Surfaces .
4. In the PropertyManager, under Target Bodies, click Selected bodies.

How do you cut a circle in Solidworks?

To trim with the Power trim option: Right-click the sketch and select Edit Sketch. (Sketch toolbar) or Tools > Sketch Tools > Trim. Click in the graphics area next to the first entity, and drag across the sketch entity to trim.

How do I convert entities in Solidworks?

To convert an entity:

1. In an open sketch, click a model edge, loop, face, curve, external sketch contour, set of edges, or set of curves. You can also click an entity after clicking the Convert Entities. …
2. Click Convert Entities. …
3. In the PropertyManager, click Select chain to convert all contiguous sketch entities. …
4. Click .