How do you place topography in Revit?

How do you add topography in Revit?

In Revit, link the topography to the current model as follows:

1. Specify coordinates for the building model. …
2. Open a plan view or a 3D view for the building model. …
3. Click Insert tab Link panel (Link Topography).
4. In the Link Topography dialog, navigate to the topography. …
5. Select the desired topography, and click Link.

How do you change topography in Revit?

Add points for accuracy if needed.

1. Click Modify | Topography tab Surface panel (Edit Surface).
2. Click Edit Surface tab Tools panel (Simplify Surface).
3. Open the site plan view and select the toposurface.
4. Enter a value for surface accuracy, and click OK.
5. Click (Finish Surface).

How do you add thickness to topography in Revit?

To create the thickness you either create a copy of the 3D view or work in the default 3D view. 2. You then switch on the section box in view properties dialog. slightly into your 3D surface until you see you Topography Cut pattern appears.

Where are Revit site settings?

To access the Site Settings dialog, click the dialog launcher on the Model Sight panel. In the Site Settings dialog, you can modify the contour line display by adding contours. To do this, click Insert. Change the Start, Stop, and Increments values and select the desired Range Type and Subcategory.

How do you show contours in Revit?

Contour labels display in site plan views.

1. Create a topographic surface with different elevations.
2. Open a site plan view.
3. Click Massing & Site tab Modify Site panel (Label Contours).
4. Sketch a line that intersects one or more contour lines.

How do you cut topography in Revit?

Split a Toposurface

1. Open a site plan or 3D view.
2. Click Site tab Modify Site panel (Split Surface).
3. In the drawing area, select the toposurface to split. …
4. Click Modify | Split Surface tab Draw panel (Pick Lines), or use other sketch tools to split the toposurface.

What is building pad in Revit?

You add a building pad by sketching a closed loop on a toposurface. After sketching the pad, you can specify a value to control the height offset from the level and other properties. … You then sketch a pad on the surface at an offset of –20 meters from the surface.

How do I change the color of topography in Revit?

To view or change toposurface or subregion properties, open a 3D view or a site plan view, and then click Site tab Model Site panel (Toposurface). Select the surface material from the list. You can create your own toposurface material. Topographical surfaces do not support materials with surface patterns.

How do you make subregion?

Create a Toposurface Subregion

1. Open a site plan that displays a toposurface.
2. Click Massing & Site tab Modify Site panel (Subregion). Revit enters sketch mode.
3. Click (Pick Lines) or use other sketching tools to create a subregion on the toposurface. Note: Use a single closed loop to create a toposurface subregion.

How do you split Toposurface in Revit?

Open a site plan or 3D view. In the drawing area, select the toposurface to split. Revit Architecture enters sketch mode. Click Modify | Split Surface tab Draw panel (Pick Lines), or use other sketch tools to split the toposurface.

How do I add topography from DWG to Revit?

Create a 3D Toposurface from the inserted DWG file:

1. Click the Toposurface tool on the Site tab of the Design bar.
2. On the Design bar, click Use Imported > Import Instance.
3. Select the DWG file.
4. Select the layers to add points from.
5. Click OK.
6. Click Finish Surface.

How do you change topography depth in Revit?

On the Model Objects tab, change settings under Topography. Sets the material that displays in a section view. Controls the depth of the cross-section of earth (for example, –30 feet or –25 meters). This value controls the poche depth for all topography elements in your project.