How do you make solid part solidworks?

How do you fill solid in Solidworks?

To create a filled surface, click Filled Surface on the Surfaces toolbar, or click Insert > Surface > Fill, set the PropertyManager options, and click OK .

How do you cut a solid with a surface in Solidworks?

To cut a solid body with a surface or plane: Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. The Edit command might vary depending on the feature you select. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface.

How do you thicken in Solidworks?

Click Thicken (Features toolbar), or click Insert > Boss/Base > Thicken. In the graphics area, select a Surface to Thicken . In the PropertyManager, under Thicken Parameters, select the side of the surface you want to thicken. When you select Thicken Both Sides , it adds the Thickness you specify to both sides.

How do you convert surface model to solid model in Inventor?

Now, to the important part – getting the surface converted to a solid body. One of the ways of doing that is using the Thicken / Offset tool. Select all faces (more options in the More tab), select the thickness and hit OK. Now because your surface has a thickness, it becomes a solid, as it now has some volume.

How do I turn my surface into a solid fusion 360?

Surfaces can be converted into a solid body with the Stitch command.

1. In the Tool Ribbon along the top of Fusion 360 workspace, select the Surface tab.
2. From the modify dropdown select Stitch.
3. Select all the surfaces to stitch together. …
4. On the stitch dialog set the operation to New Body.

Is there a hollow feature in SolidWorks?

The shell tool hollows out a part, leaves open the faces you select, and creates thin-walled features on the remaining faces. If you do not select any face on the model, you can shell a solid part, creating a closed, hollow model. You can also shell a model using multiple thicknesses.

How do you make a cylinder hollow in SolidWorks?

To Make a Hole Through the cylinder:

1. Select the front face of the cylinder by clicking on the circumference. …
2. Click Exit Sketch, then select the smaller circle by clicking on the circumference.
3. Select Extrude Cut, and in the Property Manager that appears on the left of your screen, make D1 60mm.

How do I cut part of a SolidWorks assembly?

To create an assembly feature cut:

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you split a part in SolidWorks?

To split bodies:

1. Click Split (Features toolbar) or Insert > Features > Split.
2. In the PropertyManager, set the options. …
3. Under Resulting Bodies, select the bodies to save under , or click Auto-assign Names. …
4. Double-click the body name under File, type a name for the new part in the dialog box, then click Save.