How do you make a void family in Revit?

How do I create a void family in Revit?

Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK. Load the family into the project and place it.

How do I show a void in Revit?

You need to do Cut Geometry > object > family with void, in the project.

How do you cut a void form in Revit?

A solid form created after the void has been created can be cut with the intersecting void using the Cut tool from the Modify tab of the ribbon. Select Cut, and then select the void and the elements that should be cut by the void.

What are the three types of Revit families?

The 3 kinds of families in Revit are: system families, loadable families, and in-place families.

How do you cut a sink hole in a countertop in Revit?

After adding a void to the sink family, you need to open Family Category and Parameter window and check the [Cut with Void when loaded] box. Upon placing the sink to top of the countertop, use Cut command on the Modify menu to cut the hole. You can also nest the sink to the countertop family as well.

Where is the cut Geometry tool in Revit?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.

How do you create a void?

Create a Void Form

1. On the Create tab Draw panel, select one of the drawing tools.
2. Click in the drawing area, and draw a closed loop that intersects solid geometry.
3. Select the closed loop.
4. Click Modify | Lines tab Form panel Create Form drop-down (Void Form).

How do you get a void extrusion in Revit?

Click Modify | Create Extrusion tab Mode panel (Finish Edit Mode). Revit Architecture completes the extrusion and returns you to the view in which you started the extrusion. To view the extrusion, open a 3D view.

How do you select a void extrusion in Revit?

The easiest way is to hover the cursor over the wall where the edge of the void is and if you can’t click on the void edge immediately (not the void, itself), hover over the edge and tap the tab key until you cycle through all the edges and the void edge shows up.

How do you edit a void in Revit?

Follow the steps below to edit the void.

1. Find the void in the Project Browser.
2. Right click on the type from the Project Browser.
3. Click on “Select all Instances.. “
4. Choose “In entire project”
5. From the Ribbon select “Edit In Place”

What does make void mean?

When you void something or make it void, you make it legally invalid, and that kind of void often goes with null. You might tell Cinderella, “If you’re not back by midnight, that arrangement with the pumpkin and the mice is null and void.” Definitions of void. an empty area or space.

What is in-place family in Revit?

In-place Revit families are powerful elements that can be created in the context of the Revit model. … The following quote is straight from the Revit Help topic: “You can create multiple in-place elements in your projects, and you can place copies of the same in-place element in your projects.

Can you change a Revit family category?

In the Family Editor, click Create tab (or Modify tab) Properties panel (Family Category and Parameters). From the dialog, select a family category whose properties you want to import into the current family. … Note: Family parameter options vary depending on family category. Click OK.

Where are system families Revit?

System families are predefined in and saved in templates and projects, not loaded into templates and projects from external files. Because system families are predefined in Revit, you can only load system family types in projects or templates. Revit includes many system families and project and system settings.