How do you make a spline in Revit?

How do you make a spline point?

To create a spline using interpolation points,

1. Click Modeling and then, in the Draw group, click the arrow next to Spline).
2. Click Interpolation under the Spline section. The Interpolation dialog box opens.
3. Click Modeling and then, in the Draw group, click the arrow next to Spline).

How do you draft a spline?

A Spline is a smooth curve that is fit to a set of points. You can create a non-uniform rational B-spline or NURBS curve for any number of fit points.

…

To construct Splines:

1. Click Draw > Spline (or type Spline).
2. In the graphics area, specify the: Start point of the Spline. …
3. Do one: …
4. To conclude the Spline, do one:

What are the types of splines?

There are numerous types of spline shafts, including, involute splines, which have short, curved, and evenly spaced teeth; parallel splines, which are short, straight sided splines; serrated splines, which are V shaped; and helical splines, which are built for optimal load sharing.

What is a spline wall?

A procedural spline walls system that allows you to easily create walls in any shape, and have them snap automatically to the landscape. Includes many different looks and appearance settings, and allows you to easily use custom Materials and Meshes.

How do you make a circle wall in Revit?

Draw a circle by specifying its center point and the radius. Select a tool that allows for a circle. For example, click Architecture tab Build panel Wall drop-down (Wall: Architectural). Click Modify | Place Lines tab (or respective Modify | Place tab or Modify | Create tab) Draw panel (Circle).

How do you measure a spline?

To dimension a spline, you must dimension its endpoints. You need not add spline dimensions if the spline is attached to other geometry and the endpoints are dimensioned. You can dimension spline endpoints using linear dimensions, tangency (angular) dimensions, and radius-of-curvature dimensions.

What is a spline lug nut?

What Is a Spline Lug Nut? Spline lug nuts are designed to fit in small diameter recesses found on aftermarket wheels. These lug nuts are characterized by their smooth exterior finish and internal splines on the top of the lug that’s requires a spline drive adapter for installation and removal.

What is spline command?

The spline command in AutoCAD is used to create a smooth curve, which passes through a set of predefined points. It creates a non-uniform curve passing through the points. Thus, spline can be created by defining fit points or Control Vertices (CV) points.

How do you make a spline into a polyline?

To convert multiple splines at the same time, use the PEDIT command:

1. At the command line in AutoCAD, type PEDIT.
2. Type M for Multiple.
3. Select the splines. …
4. Type Y to Convert Lines, Arcs and Splines to polylines.
5. Specify the precision <0-99>.
6. Press the Esc key to exit the command.

How do I turn a line into a polyline?

Converting Line to Polyline



Type PE on the command line and press Enter to start polyline edit command, the command line will prompt you to select objects for making changes. Click on the object which you want to change to polyline, you can also select multiple objects by selecting Multiple from the command prompt.