How do you make a loop in Solidworks?

What is a loop in Solidworks?

You can select a loop of connecting edges on a part. Hidden edges are selected in all view modes. To select connecting entities in a sketch, use Select Chain. To select a loop: On a part, right-click an edge and choose Select Loop.

How do you create a closed loop in Solidworks?

Closed Group<1> appears under Profiles .

1. In the SelectionManager: Click Select Closed Loop . Select Auto-OK selections.
2. Select the two loops one-by-one in approximately the same area to automatically add them to Profiles in the PropertyManager as Closed Loop<1> and <2>.

How do you make a 2d spiral in Solidworks?

You can create a helix or spiral curve in a part.

1. In a part, do one of the following: Open a sketch and sketch a circle. Select a sketch that contains a circle. …
2. Click Helix and Spiral (Curves toolbar) or Insert > Curve > Helix/Spiral .
3. Set values in the Helix/Spiral PropertyManager.
4. Click .

How do you make a tube in Solidworks?

To create a tube drawing, click Tube Drawing (Tubing toolbar). Click to select a sheet format template. To include a BOM, select Piping BOM template or Tubing BOM template, and click to select a BOM template. Select other options and click .

How do you close a loft in SolidWorks?

Select Close loft under Options to create a closed body along the loft direction. This connects the last sketch and the first sketch automatically. Loft with Close loft selected.

How do I open a group in SolidWorks?

Tutorial – Using Selection manager for open group in SolidWorks.

1. Start SolidWorks and open the attached file.
2. Under surfaces tab select boundary surface.
3. Now select the 3d sketches for direction1.
4. Select the first edge for the direction2.
5. Now right click and select SelectionManager.

How do you make a sweep in Solidworks?

To create a sweep: Sketch a closed, non-intersecting profile on a plane or a face.

…

Click one of the following:

1. Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep.
2. Swept Cut on the Features toolbar or Insert > Cut > Sweep.
3. Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.

How do you make a 2D spiral?

In the graphics area, specify the base center point (P1) to define the 2D spiral position. Do one of the following: Specify a point (P2) to define the base radius. This point defines the start point.

…

Creating 2D Spirals

1. On the ribbon, click Home > Draw > Helix.
2. On the menu, click Draw > Helix.
3. Type Helix.

How do you make a circular pipe in SolidWorks?

To create a circular profile sweep:

1. Open install_dir sampleswhatsnewpartssweep_part_1. …
2. Click Insert > Cut > Sweep to cut a tube into the part.
3. In the PropertyManager, under Profile and Path, click Circular Profile.
4. In the graphics area, select a curved edge for Path. …
5. Click .