How do you lock an object to a reference plane in Revit?

How do you lock a reference plane in Revit?

To constrain the sketch of a piece of geometry during creation:

1. Use the Align tool and select the specific reference plane and the sketch line to establish the constraint.
2. When the lock symbol displays, click it to lock the constraint.

How do you lock a void to a reference plane in Revit?

Just create circles in the sketch of the extrusion, inside the rectangle. These circles should be locked to reference circles. The reference circles should be constrained to reference planes.

How do you lock an extrusion to reference plane in Revit?

Reference planes are used as construction and guide lines. While in a sketch mode (or after finishing the sketch), a line in an extrusion can be locked with the reference plane it’s on top of by using the align tool to click both lines and then clicking the lock icon (see Figure 11).

What is the difference between reference plane and reference line in Revit?

What is the difference between reference planes and reference lines? A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.

What is reference plane in Revit?

Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model. Topics in this section. Add a Reference Plane. Use the Line tool or the Pick Line tool to draw a reference plane.

How do you create a work plane in Revit?

Select a work plane by name, by picking a plane, or by picking a line in the plane you want to select. On the ribbon, click (Set). In the Work Plane dialog, under Specify a new Work Plane, select one of the following options: Name—Choose an available work plane from the list, and click OK.

How do you lock a circle in a Revit family?

Go to the Modify tab and select the Align command from the Modify panel. You can now select the vertical reference plane, then the little cross at the circle centerpoint to lock the circle to that plane. Repeat the Align command to lock the circle to the horizontal reference plane.

Where are reference planes in Revit?

On the ribbon, click (Reference Plane). To draw a line: On the Draw panel, click (Line). In the drawing area, draw the reference planes by dragging the cursor.

What is a work plane in Revit?

A work plane is a virtual 2-dimensional surface used as the origin for a view or for sketching elements. Work Plane Set or Show or Viewer. on the Architecture, Structure, or Systems tab in projects. on the Create tab of the Family Editor.

How do you change work planes in Revit?

Select a work plane-based element in a view. Click Modify | tab Work Plane panel (Edit Work Plane).

…

In the Work Plane dialog, select another work plane.

1. Name—Choose an available work plane from the list, and click OK. …
2. Pick a plane—Revit creates a plane coincident to the selected plane.