How do you flip a section view in SolidWorks?

How do you Rotate a section view in Solidworks?

Rotating a Drawing View Around its Center Point

1. Click Rotate View. (View toolbar), or right-click the view and select Zoom/Pan/Rotate > Rotate View. …
2. Do one of the following: Drag the view to the desired rotation. …
3. Set options, then click Apply: …
4. Click Close to close the dialog box.

How do I change the side of an isometric view in Solidworks?

To change the orientation of a section or aligned section view to isometric: Right-click a section or aligned section view and select Isometric Section View. To remove the isometric orientation, right-click the view and select Remove Isometric View.

How do I view sections in Solidworks?

(View toolbar) or View > Display > Section View.

…

Section Views in Models

1. Select bodies or components to include in or exclude from section views.
2. Toggle the view off and on. …
3. Show or hide a section cap. …
4. Select the faces, edges, and vertices created by a section view.

How do I Rotate a section view?

Use the Rotate tool to rotate a section view or a scope box.

1. Open the project view that contains the section (callout) or scope box to rotate.
2. Select the section (callout) or scope box.
3. Click Modify tab Modify panel (Rotate).
4. Rotate the view.

How do you Rotate a drawing view in Solidworks 2018?

To rotate a drawing view:

1. Click Rotate View. (View toolbar).
2. Select a view. (You can select a view before or after activating the tool.)
3. Rotate the view in one of these ways: Drag the view in the graphics area. …
4. Select from these options: …
5. Click Apply to update the views.

How do you Rotate freely in SolidWorks?

Click Rotate View (View toolbar) or View > Modify > Rotate then drag the pointer . Drag with the middle mouse button. Press the arrow keys. Hold down Shift to rotate in 90° increments.

How do I change the projection view in SolidWorks?

Click Projected View on the Drawing toolbar, or click Insert, Drawing View, Projected. The Projected View PropertyManager appears. In the graphics area, select a view from which to project. To select the direction of projection, move the pointer to the appropriate side of the selected view.

How do I change the drawing view in SolidWorks?

Changing the Orientation of a Model View

1. Select a view.
2. In the PropertyManager, under Orientation, select a different view orientation.

What is a Trimetric view?

A Trimetric projection is one in which all three angles have different degrees of foreshortening relative to their length. All angles where the axes meet will be different in this type of drawing.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

How do section views work?

A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views. By taking an imaginary cut through the object and removing a portion, the inside features may be seen more clearly.