How do you fill a surface body in Solidworks?

How do you thicken a surface in Solidworks?

To thicken a surface:

1. Click Thicken (Features toolbar), or click Insert > Boss/Base > Thicken.
2. In the graphics area, select a Surface to Thicken .
3. In the PropertyManager, under Thicken Parameters, select the side of the surface you want to thicken.

Where is the surfaces toolbar in Solidworks?

To display SOLIDWORKS toolbars: Right-click in the window border and select or clear a toolbar name. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.

What is a surface body in SOLIDWORKS?

Surface body is a general term that describes connected zero-thickness geometries such as single surfaces, knit surfaces, trimmed and filleted surfaces, and so on. You can have multiple surface bodies in a single part.

How do you create a solid body in SOLIDWORKS?

Grouping Bodies into Folders

1. Expand Solid Bodies in the FeatureManager design tree.
2. Right-click a solid body name, select Add to New Folder, and name the folder. The selected solid body is listed in the new folder. You can drag other bodies into the same folder, and create other new folders and subfolders.

How do I change solid to surface in SOLIDWORKS?

To convert features to bodies and surfaces: Open an assembly file, such as the HousingAssy. SLDASM model shown. The Housing component is part of an assembly.

…

In the dialog box:

1. Under File Name, change the name to Housing2. SLDPRT.
2. Select Save as.
3. Select Preserve reference geometry and sketches.
4. Click OK.

How do you thicken a lofted surface in Solidworks?

To thicken a surface:

1. Click Thicken on the Features toolbar, or click Insert > Boss/Base > Thicken.
2. Under Thicken Parameters, do the following: In the graphics area, select a Surface to Thicken . Examine the preview, and select the side of the surface you want to thicken, as shown below. …
3. Click OK . Original surface.

How do I change thickness in Solidworks?

To set line thickness:

1. In a drawing, click Tools > Options > Document Properties > Line Thickness.
2. In the dialog box, under Line thickness print settings, enter a value for the line weights (Thin, Normal, Thick, and five additional line thickness settings). …
3. Click OK.

How do you make a part thinner in Solidworks?

You can scale a part or surface model about its centroid, the model origin, or a coordinate system. To scale a solid or surface model: In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager.

How do I add the surface toolbar in SOLIDWORKS?

To display SOLIDWORKS toolbars: Right-click in the window border, click Toolbars, and select or clear a toolbar name.

How do I add a tab in SOLIDWORKS?

To create a tab and slot:

1. In a part, click Tab and Slot (Sheet Metal toolbar) or Insert > Sheet Metal > Tab and Slot.
2. In the PropertyManager, specify options.
3. In the graphics area, select an edge for the tabs and a corresponding face for the slots. …
4. Click .