How do you extrude a path in autocad?

What is Extrude command?

Creates a 3D solid from an object that encloses an area, or a 3D surface from an object with open ends. Find. Objects can be extruded orthogonally from the plane of the source object, in a specified direction, or along a selected path. You can also specify a taper angle.

How do I show a solid in Autocad?

To Turn On or Off the Display of Solid Fills

1. Click View tab User Interface panel. Find.
2. In the Options dialog box, Display tab, under Display Performance, click or clear Apply Solid Fill.
3. To display your changes, click View menu Regen.

What is the difference between extrude and Presspull command?

If you use the Presspull command on an existing face then a simple extrusion will be created but if you press and hold the CTRL key and then use Presspull command on the surface then the extrusion will follow the geometry along the profile of 3D solid as shown in the image below.

What is the use of Extrude command?

Creates a 3D solid from an object that encloses an area, or a 3D surface from an object with open ends. Objects can be extruded orthogonally from the plane of the source object, in a specified direction, or along a selected path. You can also specify a taper angle.13 мая 2018 г.

How do you extrude an angle in Fusion 360?

Go to Solution. there is an angle manipulator in Extrude, but it is for setting the draft angle on the Extrude. It’s not really for Extruding at an angle. For that, you need Sweep – define another sketch with a line at the angle you want, then use Sweep to create that angled “extrusion”.

What is the Presspull command doing in Autocad?

Dynamically modifies objects by extrusion and offset. Get visual feedback as you move the cursor after selecting a 2D object, an area formed by a closed boundary or a 3D solid face. The press or pull behavior responds to the type of object you select to create extrusions and offsets.

Why is Presspull not working?

Make sure the object has a closed boundary. To check type BPOLY command, to generate a boundary polygon in the area of interest. If a polygon cannot be created, then there are gaps in the geometry. Recreate the geometry, and try the PRESSPULL command as boundaries are being generated.

How do I change to 3d in AutoCAD?

To Display a Preset 3D View

1. Click View tab Views panel View Manager. Find. The View tab is not displayed by default, so an alternative method is to enter VIEW at the Command prompt. You can also employ the ViewCube in the top-right corner of the drawing area.
2. Select a preset view (Top, Bottom, Left, and so on).

How do you make a 3d object solid in AutoCAD?

To Create a 3D Solid by Extruding

1. If necessary, on the status bar click Workspace Switching and select 3D Modeling. Find.
2. Click Solid tab > Solid panel > Extrude. Find.
3. Select the objects or edge subobjects to extrude.
4. Specify the height.

How do I view 3d objects in AutoCAD?

For interactive 3D viewing, use the 3DORBIT command.
…
You can also display standard views for 3D models using the following command inputs:

1. Isometric view: -VPOINT 1,-1,1.
2. Top view: -VPOINT 0,0,1 or PLAN.
3. Front view: -VPOINT 0,-1,0.
4. Right side view: 1,0,0.