How do you delete a section of a part in Solidworks?

How do you delete part of a part in Solidworks?

To delete a component from an assembly:

1. Click the component in the graphics area or in the FeatureManager design tree.
2. Press the Delete key, click Edit > Delete, or right-click and select Delete.
3. Click Yes to confirm the deletion.

What is removed section in Solidworks?

Removed section views show slices of the model at selected locations along a drawing view.

What is a removed section view?

The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. That’s different than the traditional section view, which is projected parallel to the cutting line.

How do you delete something in Solidworks?

To delete an item:

1. Select one or more items to delete in the graphics area or in the FeatureManager design tree.
2. Click Delete (Standard toolbar), click Edit > Delete or press Delete.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

How do you cut a part in assembly in Solidworks?

1 Answer

1. In the assembly, click Edit Component for the part to be cut.
2. Insert – Feature – Cavity.
3. Select the part that you wish to do the cutting with.
4. Hide the cutting tool if necessary. You can’t suppress or delete it, as the cavity feature is referencing it.

How do I cut an assembly in Solidworks?

To create an assembly feature cut:

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you delete a extruded part in Solidworks?

Select a plane to define an extrude direction normal to the plane. To remove the faces defining the extrude from the model after extruding, click Delete original faces.

What is offset section?

What is an offset section? An offset section is produced by bending the cutting plane to show features that don’t lie in the same plane.

What is revolved section?

A revolved view is a cross section of an existing view, revolved 90 degrees around a cutting plane projection. You can use a cross section created in the 3D model as the cutting plane, or you can create one on the fly while placing the view.

What is removed section in engineering drawing?

The removed section technique is a very useful technique to show the important details of a complex part on the technical drawing sheets. To create a removed section from a part, you need to show the section as section A-A, section B-B, etc. on the main part.

How do I remove a hatch from section view in Solidworks?

To delete an area hatch: Select it in the graphics area and press Delete. Sketched profiles are not deleted when the area hatch is deleted.

How do you view sections in Solidworks?

Creating a Section View Manually

1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
3. Sketch a section line. …
4. Click to place the view.