How do you define thickness in Solidworks?

What is thickness analysis?

Use Thickness Analysis to: Identify thick and thin regions of a part (especially for plastic parts and castings) Determine portions of a part that are equal to a specified target thickness. Assess potential failure regions or design flaws.

What is a shell element in solidworks?

Because shell elements are infinitely thin, SOLIDWORKS Simulation uses a color coding system to distinguish one side of the shell element from the other. The Orange color corresponds to the bottom surface of the shell element while the gray corresponds to the top surface of the shell element.

How do I change the thickness of a part in Solidworks?

Click Thicken on the Features toolbar, or click Insert > Boss/Base > Thicken. Examine the preview, and select the side of the surface you want to thicken, as shown below. Enter the Thickness . Note that when you select Thicken Both Sides , it adds the Thickness you specify to both sides.

How do you do a thickness analysis in Catia?

CATPart document.

1. Click Wall Thickness Analysis in the Analysis toolbar. The Wall Thickness Analysis dialog box is displayed.
2. Select the body of interest. …
3. Keep Sphere as the computation method. …
4. Keep Tolerance as the parameter defining the calculation precision you want. …
5. Enter the value to define the tolerance you want.

What is thick shell?

A shell made of a single isotropic material with a ratio greater than 1/15 is considered “thick”; if the ratio is less than 1/15, the shell is considered “thin.” These estimates are approximate; you should always check the transverse shear effects in your model to verify the assumed shell behavior.

How do I use the Shell feature in Solidworks?

Shell with Uniform Thickness

1. Set Thickness to set the thickness of the faces you keep.
2. Select one or more faces in the graphics area for Faces to remove . …
3. Select Shell outward to increase the outside dimensions of the part.
4. Select Show preview to display a preview of the shell feature.

How do you make a part thinner in Solidworks?

You can scale a part or surface model about its centroid, the model origin, or a coordinate system. To scale a solid or surface model: In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager.