How do you cut a wall sweep in Revit?

How do I edit a wall sweep in Revit?

Select a wall sweep in a 3D or elevation view, or click Architecture tab Build panel Wall drop-down (Wall: Sweep). On the Properties palette, click Edit Type, or click Modify | Place Sweep tab Properties panel Type Properties. In the Type Properties dialog, for Profile, select the desired profile type. Click OK.

How do I cut a plan wall in Revit?

To find this, go to View tab> Graphics panel > Cut Profile – then select the wall and sketch the new profile. As another example, we can also edit the shared boundary between two objects, so if we have a retaining wall with a footing, we may want to show the wall / footing key.

How do you create a void sweep in Revit?

To create a void sweep, click Void Forms drop-down (Void Sweep).

…

1. Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list. …
2. On the Options Bar, use the X, Y, Angle, and Flip options to adjust the position of the profile. …
3. Click Apply.
4. Select the path, and in a 3D view, zoom in to see the profile.

How do you make a new wall sweep?

Add a Wall Sweep

1. Open a 3D or elevation view containing the wall to which you want to add the sweep.
2. Click Architecture tab Build panel Wall drop-down (Wall: Sweep).
3. In the Type Selector, select the desired type of wall sweep.

How do you vertically wall in Revit?

Help

1. Click Modify tab Modify panel (Split Element).
2. Place the cursor on the wall or line at the point you wish to split. Note: A stacked wall can only be split vertically. …
3. Click to place the split. A permanent horizontal line displays on the wall indicating the split.

How do you blend in Revit?

To create a blend, select the blend command. You are placed in the Sketch mode. Select a tool from the Draw menu to draw a closed-loop sketch for the base of the blend. Once the base sketch is complete, click Edit Top on the Mode panel of the contextual tab.

How do you create a wall sweep in Revit?

Help

1. Select a wall sweep in a 3D or elevation view, or click Architecture tab Build panel Wall drop-down (Wall: Sweep).
2. On the Properties palette, click Edit Type, or click Modify | Place Sweep tab Properties panel Type Properties.
3. In the Type Properties dialog, for Profile, select the desired profile type.
4. Click OK.