How do you cut a staggered section in Revit?

How do you break sections in Revit?

Break a Section Line

1. Click the break control ( ) and adjust the length of the section line segments.
2. To rejoin the section line, click the break control again. Note: A break in a section line is view-specific. It affects the display of the section only in the view where the break was made.

How do you cut a Poche section in Revit?

Bio

1. I sometimes get asked the following question: How do you apply a colour pattern to cut surfaces in Revit? …
2. You can hide the section box in ‘Visibility Graphics’, but don’t uncheck the box in the view properties. …
3. When you click on the value for the property, it will automatically default to the “Poche” material.

How do you make a jagged section in Revit?

Select it, Then in the ribbon under Modify / Views, click the “Split Section” button. the cursor will show a knife. click on the section where you want to make the cut and drag the section to make the kinked split.

How do you split sections?

Add a section break

1. Select where you want a new section to begin.
2. Go to Layout > Breaks.
3. Choose the type of section break you want: Next Page Section break starts the new section on the following page. Continuous Section break starts the new section on the same page.

Can you have multiple section boxes in Revit?

Section boxes are particular for each 3D view, and they can only have one section box. There is no way you can “add” section boxes to a single view, it is how Revit works.

How do you turn off a selection box in Revit?

To view more or less of your selected 3D view, simply use the ‘little grips’ to adjust the space. To reset your view, go to the Properties Menu and under the Extents tab. There should be a check box by the Selection box option which turns your Selection Box on and off.

What is Poche material?

The other material highlighted in yellow is the poche material (pronounced Poe-shay). It’s also a feature that was originally tied to the graphic display of the model when Coarse Detail Level is in effect. However they’ve made the Poche material assignment a Type Property of 3D views.

How do you change the color of a section cut in Revit?

To change how the cut surface of the material displays in views, under Cut Pattern, do the following:

1. To change the cut pattern, click the arrow, and select a pattern from the list.
2. To change the color that is used to draw the cut pattern, click the color swatch. In the Color dialog, select a color. Click OK.

How do you make a staggered section?

Staggering a Section view in Revit

1. Simply select the section line and access the split segment tool orthogonally moving parts of the section cut line to include or exclude objects from being shown in the section view.
2. Drag the handles of the clipping extents if necessary, to control the section view extents.

Can you jog a section cut in Revit?

Is there any way to jog a section cut line? Yes. Create a section. Select the section, and on the options bar, there is a button that says “split segment”.

How do you build a building section in jogging?

But you can ‘Jog’ or offset a section line.

1. Sometimes a Jogged Section line comes in very handi. …
2. Start the Section tool and click the two end points of a single straight segment.
3. Then click on the section line and note the Split Segment button on the options bar at the top.
4. Click the Split Segment button.