How do you cut a groove in SolidWorks?

Where is grooves in Solidworks?

Click Grooves (Toolbox toolbar) or Toolbox > Grooves . In the Grooves dialog box: To create an O-ring groove, click the O-Ring Grooves tab.

How do you create a circlip in Solidworks?

The Retaining Ring Grooves tab lets you select and create retaining ring grooves. To open this tab: Click Grooves (Toolbox toolbar) or Tools > Toolbox > Grooves. In the Grooves dialog box, click Retaining Ring Grooves.

How do you use lip and groove in Solidworks?

Select the tool from Insert>Fastening Feature>Lip/Groove. Choose a body for the feature, and select either a lip or groove. Select the face and edge for feature. Use tangent propagation, if needed, to easily select multiple connected edges.

How do you draw a O-ring groove in Solidworks?

To create an O-ring groove, click the O-Ring Grooves tab.

…

Creating Grooves

1. In the FeatureManager design tree, expand the groove feature.
2. Right-click the sketch under the feature and select Edit Sketch. The sketch opens for editing. …
3. Add dimensions and relations to the sketch to define its position.
4. Exit the sketch.

What is groove in O-ring?

Designing the parts of an application where o-rings will be applied is broadly termed “o-ring groove design”. In order to seal properly, the o-ring has to deform in the application by being compressed and stretched in any number of ways.

How do you size an O-ring hole?

How to Measure O-Rings

1. Place the O-ring on a clean, flat, level surface.
2. Determine the inside diameter by using a ruler to measure from one inner edge to another.
3. Use a ruler to measure the diameter, from one outer corner of the O-ring to the other outer corner.
4. Finally, measure the cross-section.

How do you cut a groove in a cylinder in SolidWorks?

To create a groove:

1. Select a cylindrical face on a part where you want to place the groove. …
2. Click Grooves (Toolbox toolbar) or Toolbox > Grooves .
3. In the Grooves dialog box: …
4. Select a standard, groove type, and available groove size from the lists on the top left of the tab. …
5. Click Create.

What is Toolbox in SolidWorks?

The Toolbox is a collection of several powerful tools built into SolidWorks; it can increase productivity and decrease the time required to complete a design. The Toolbox contains a vast library of standard hardware components that can easily be dropped into a design at any point.

How deep should an O-ring groove be?

Cross Section & Groove Design Data