How do you create a radius in SOLIDWORKS?

How do you make a Radius in Solidworks?

To change the placement of circular dimensions:

1. Right-click the dimension.
2. In the Dimension PropertyManager, select the Leaders tab.
3. Under Witness/Leader Display, select a placement option. For example: Radius. Diameter. You can also right click the dimension and select Display Options.

How do you add a Radius to a drawing in Solidworks?

With a drawing open, click Options (Standard toolbar), select Document Properties, and then select Dimensions > Radius.

How do you create a diameter dimension in Solidworks?

To create a diameter, move the pointer to the far side of the centerline. Click to place the dimension. for diametric dimensions. Select other lines or points in the sketch to create additional dimensions.

How do you add circumference in Solidworks?

Creating Arc Dimensions

1. In an open sketch, click Smart Dimension (Dimensions/Relations toolbar) or Tools > Dimensions > Smart.
2. Select the arc.
3. Press Ctrl and select the two arc endpoints.
4. Move the pointer to show the dimension preview.
5. Set the value in the Modify dialog box and click .
6. Click to place the dimension.

How do you convert diameter to radius?

Just remember to divide the diameter by two to get the radius. If you were asked to find the radius instead of the diameter, you would simply divide 7 feet by 2 because the radius is one-half the measure of the diameter.

How do you change radius to diameter in Solidworks?

How to turn a radius dimension into a diameter (TLDR version)

1. Select a dimension (in drawing, part or assembly)
2. Look in the properties menu on the left.
3. Click the Leaders tab.
4. Click one of the two diameter buttons.

How do I rotate a dimension in Solidworks?

You can change a dimension in a part, sketch, assembly, or drawing in the Modify dialog box. To change a dimension: Double-click a dimension. The Modify dialog box appears.

How do you dimension to the edge of a circle in Solidworks?

To dimension between the edges of two arcs:

1. Click Smart Dimension (Dimensions/Relations toolbar) or Tools, Dimensions, Smart.
2. Select the edge of the first arc, and then select the edge of the second arc.
3. Press Shift, and then click to apply the dimension between the two edges.

How do you change diameter to R in Solidworks?

How to turn a radius dimension into a diameter (TLDR version)

1. Select a dimension (in drawing, part or assembly)
2. Look in the properties menu on the left.
3. Click the Leaders tab.
4. Click one of the two diameter buttons.

How do I create a symmetric dimension in Solidworks?

To create a symmetrical angular dimension:

1. In a sketch with a centerline and lines or points, click Smart Dimension (Dimensions/Relations toolbar) or Tools > Dimensions > Smart.
2. Select the centerline and a non-parallel line.
3. To create a half angle dimension, move the pointer to the desired location.

How do you set a radius on a drawing?

Creating Radius Dimensions

1. Click Dimension > Radius (or type RadiusDimension).
2. In the graphics area: Select an Arc or Circle. Specify the location of the dimension line or specify an option: Angle, Note, or Text: See Editing and Formatting Dimension Text.

How do I add a fillet in Solidworks?

To create fillets:

1. Click Fillet on the Features toolbar, or click Insert, Features, Fillet/Round.
2. Set the PropertyManager options. For constant radius fillets only, you can use the FilletXpert to add or modify fillets and to manage fillet corners.
3. Click OK .