How do you create a extrusion in Revit 2021?

How do you make an extrusion in Revit 2022?

Create a Roof by Extrusion

1. Display an elevation, 3D, or section view.
2. Click Architecture tab Build panel Roof drop-down (Roof by Extrusion).
3. Specify the work plane.
4. In the Roof Reference Level and Offset dialog, select a value for Level. …
5. To raise or lower the roof from the reference level, specify a value for Offset.

Can you extrude in Revit?

Click Modify | Create Extrusion tab Mode panel (Finish Edit Mode). Revit completes the extrusion and returns you to the view in which you started the extrusion. To view the extrusion, open a 3D view. To resize the extrusion in the 3D view, select it and use grips to edit it.

Where is create form in Revit 2021?

On the Create tab Draw panel, select one of the drawing tools. Click in the drawing area, and draw a closed loop. Select the closed loop. Click Modify | Lines tab Form panel (Create Form).

How do you create a void extrusion in Revit?

Click in the drawing area, and draw a closed loop that intersects solid geometry. Select the closed loop. Click Modify | Lines tab Form panel Create Form drop-down (Void Form). A void form extrusion is created.

How do I create a void in Revit 2021?

Create a Void Form

1. On the Create tab Draw panel, select one of the drawing tools.
2. Click in the drawing area, and draw a closed loop that intersects solid geometry.
3. Select the closed loop.
4. Click Modify | Lines tab Form panel Create Form drop-down (Void Form).

How do I create a roof in Revit 2022?

Click Architecture tab Roof drop-down (Roof by Footprint). Click Architecture tab Roof drop-down (Roof by Footprint).

…

In the drawing area, do the following:

1. Highlight an exterior wall.
2. Press Tab to select the chain of walls.
3. Click to place the roof lines.
4. On the Mode panel, click (Finish).

How do you change the extrusion material in Revit?

Click Modify | Extrusion tab Mode panel (Edit Extrusion). If desired, modify the extrusion profile. On the Properties palette, change the visibility, material, or subcategory of the extrusion, if desired. To change the extrusion to a solid or a void, under Identity Data, for Solid/Void, select Solid or Void.

How do you create a massing model in Revit?

Create an In-Place Mass

1. Click Massing & Site tab Conceptual Mass panel (In-Place Mass).
2. Enter a name for the in-place mass family, and click OK. The application window displays the conceptual design environment.
3. Create the desired shapes using the tools on the Draw panel. …
4. When you are finished, click Finish Mass.

What is extrusion in Revit?

A solid or void extrusion is the easiest form to create. You sketch a 2D profile of the form on a work plane, and then extrude that profile perpendicular to the plane on which you sketched it.

How do you edit a free form element in Revit?

Edit a Form in X-ray Mode

1. Select a form.
2. Click Modify | Form Element tab Form Element panel (X-Ray). …
3. Select any elements of the form and 3D controls display to reposition nodes and lines. …
4. Readjust source geometry to adjust the shape of the form.

How do you create a blend in Revit?

To create a blend, select the blend command. You are placed in the Sketch mode. Select a tool from the Draw menu to draw a closed-loop sketch for the base of the blend. Once the base sketch is complete, click Edit Top on the Mode panel of the contextual tab.

How do you make a void roof in Revit?

Create an In-place family roof at choosing “Void extrusion”. Ideally in a section view draw the contourline of the void using the “Pick line” option on the base of the inside edge of the roof. Use the “Cut geometry” command and select first the roof than the void. After that you can click “Finish” to execute the cut.

How do I use the Cut tool in Revit?

Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.