How do you change the view in Solidworks?

How do I go back to default view in Solidworks?

To return all standard model views to their default settings in the Orientation dialog box:

1. In the Orientation dialog box, click Reset Standard Views. .
2. Click Yes to confirm the update.

How do I change the view of a drawing?

To change the angles in a drawing view with respect to the normal, the horizontal, the vertical, or a specified edge or axis:

1. Select a general view to reorient. …
2. Right-click and click Properties. …
3. Click Angles under View Orientation. …
4. Select the type of reference that you want to specify from the Rotation reference list.

How do you change isometric view in Solidworks?

To change the orientation of a section or aligned section view to isometric: Right-click a section or aligned section view and select Isometric Section View. To remove the isometric orientation, right-click the view and select Remove Isometric View.

What is an auxiliary view in SolidWorks?

An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view. You can use sketched lines for folding.

How do I create a custom view in SolidWorks?

Creating a Custom View

1. Use the Rotate, Zoom, and Pan commands to create the desired view. …
2. Press the spacebar to open the Orientation dialog box.
3. In the dialog box, click New View .
4. Type a name in the dialog box and click OK.

What are different views in engineering drawing?

The most common way to communicate all the information is by using three different views in a multiview drawing: Front view. Top view. Side view.

What is a Trimetric view?

A Trimetric projection is one in which all three angles have different degrees of foreshortening relative to their length. All angles where the axes meet will be different in this type of drawing.