How do you add a body in SolidWorks?

How do you create a solid body in Solidworks?

To convert a boundary surface into a solid, click Insert > Surface > Boundary Surface, and in Options and Preview, click Create solid. To convert a trim-surface feature into a solid, click Insert > Surface > Trim Surface and in Surface Split Options, click Create solid.

How do I create a multi body part in Solidworks?

Saving an Assembly as a Multibody Part

1. Open an assembly document.
2. Click File > Save As. The Save As dialog box appears.
3. Set the Save as type to Part (*. prt, *. …
4. Select one of the following: Exterior Faces to save the exterior faces as Surface Bodies . …
5. Select or clear the following: …
6. Click Save.

What is a body in Solidworks?

A multibody part occurs within SOLIDWORKS when there is more than one continuous solid inside a single part file. A multibody part can be used as an intermediate step towards a single body or an as alternative to an assembly. While multibody parts should not replace assemblies, they can be a useful alternative.

How do I add a part to a drawing in Solidworks?

When the new document window opens, select Browse under the Part/Assembly to Insert section on the left-hand bar and select a part or assembly you wish you insert from the file browser.

How do you transform bodies in Solidworks?

Hiding a Body



In the drawing view, right-click the body and click Show/Hide > Hide Body.

What is a multibody part in Solidworks?

A multibody part consists of multiple solid bodies that are not dynamic. If you need to represent dynamic motion among bodies, use an assembly. Tools such as Move Component, Dynamic Clearance, and Collision Detection are available only with assembly documents.

How do you isolate a body in Solidworks?

To isolate bodies:

1. Select the bodies to isolate.
2. Click View > Display > Isolate or right-click and select Isolate.
3. On the Isolate pop-up toolbar, you can click one of the following to change the Visibility of Removed Bodies: Transparent. …
4. When you are done working on the isolated bodies, click Exit Isolate.

How do you create a part in Solidworks 2020?

To create a part from a Toolbox component:

1. In the Design Library task pane, under Toolbox , expand the standard, category, and type of the component. …
2. Right-click the component and click Create Part.
3. In the PropertyManager, under Properties, specify property values. …
4. Click .

How do you copy and paste a body in Solidworks?

Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy. Specify parameters to move, copy, or rotate bodies. Apply mates between bodies. Click Translate/Rotate or Constraints at the bottom of the PropertyManager (if necessary) to switch to the page you want.

How do you convert solid bodies to parts in Solidworks?

Saving Split Bodies

1. Click Insert > Features > Save Bodies.
2. Select the bodies to save in the graphics area, or under in Resulting Parts. …
3. Under Resulting Parts, double-click each file name under File to open the Save As dialog box. …
4. Select Consume cut bodies to copy cut-list items from multibody parts to resulting parts.

How do you copy geometry in Solidworks?

To copy the feature to the part, hold CTRL , and select the Cut Feature in the FeatureManager Design Tree. While holding CTRL and the left mouse button, drag and drop the feature in the desired location.

How do I create a part in an assembly in Solidworks?

To create a part within an assembly:

1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
2. For externally saved parts, type a name for the new part in the Save As dialog box and click Save.
3. Select a plane or planar face (while the pointer is ).

What is part drawing?

A component or part drawing is termed as a production drawing, if it facilities its manufacture. It is an authorized document to produce the component in the shop floor. It furnishes all dimensions, limits and special finishing. processes such as heat treatment, grinding, etc., in addition. to the material used.