How do I use user defined results in Ansys Workbench?

How do I use user defined results in Ansys?

To access this, first click on the ‘Solution’ branch and then select ‘Worksheet’ (tab in R12, button in R12. 1 and newer). This will show you a list of all the user defined result expressions. Find one you like, right-mouse-click on it and select ‘Create User Defined Result’.

How do you read Ansys Workbench results?

Workbench

1. Open ANSYS Mechanical and select Solution from the model tree.
2. Click Tools > Read Result Files and locate the . …
3. Click User Defined Result and enter the SVAR to view. …
4. Enter a Display Time.
5. Right-click User Defined Result in the model tree and select Evaluate All Results.

How do you save Ansys Workbench results?

To do that, go to Workbench>Archive. 120 MB is the maximum file size that you can attach. If the file size exceeds 120 MB, right click on Model or Mesh, and Clear Generated Data, to delete the mesh and the solution from the project. File>Save As a new name and then File>Archive to create a much smaller .

How do I print Ansys results?

for example, you can use the APDL command, POST1 (Main Menu>General Postproc), and check PLNSOL (Main Menu>General Postproc>Plot Results>Nodal Solu) to display the results as continuous contours. Alternatively you can use PRNSOL (Main Menu>General Postproc>List Results>Nodal Solution) to print the results into a file.

How do I read an RST in Ansys?

Start Ansys Mechanical APDL, go to /POST1, and use the File command to indicate an RST results file of interest. Use the SET command to read a result of interest—this works for RST files that, by default in APDL, contain element and node data for the model.

What is post processing in Ansys?

CFD-Post is the original graphical postprocessor of the CFX-5 software suite. But later it was adapted for the postprocessing of ANSYS Fluent results too. From its origin, CFD-Post operates on vertex-based sets of data, i.e. variables which are primarily stored in the vertices of a numerical mesh.

How do I Export mesh from ANSYS Workbench?

Steps to be followed to get the desired result are:

1. step 1: open the ANSYS workbench and open the file in ANSYS mechanical.
2. step 2: select the solution.
3. step 3: select the solution from the ribbon (From topmost menu)
4. step 4: select write input files from tools.
5. step 5: change save as type to all files.

How do I Export a project from Workbench?

OPTION 1:

1. Open Workbench (in its Configuration Perspective) and find the project in question under the Navigator pane.
2. Right click on the project and click on ‘Export’.
3. Under General, click on ‘Archive File’.

Which files can be imported in ANSYS?

ANSYS FLUENT allows you to import the following file formats:

• ABAQUS . inp, . fil, and . odb files.
• Mechanical APDL . inp, . cdb, . rst, . rmg, and . rfl files.
• ANSYS CFX . def and . res files.
• CGNS files.
• EnSight files.
• ANSYS FIDAP Neutral files.
• GAMBIT files.
• HYPERMESH ASCII files.

How do I use nodal force in Ansys Workbench?

To define a nodal force, right-click on the analysis in ANSYS® Mechanical, then hover your mouse on the ‘Insert’ tab. And click on ‘Nodal Force’ to define nodal forces. Select a proper named selection. When you are defining the boundary conditions on a nodal basis, you can not select geometries in conventional methods.

What is bearing load in Ansys?

An ANSYS Bearing Load applies forces to one half of a cylindrical face in a radial direction on the face with a magnitude proportional to the cosine of the angle of the face normal to the load direction.