How do i use dimcontinue in autocad?

Prompts you to select a linear, ordinate, or angular dimension to use as the continued dimension. After you select a continued dimension, the Specify a Second Extension Line Origin prompt or the Specify Feature Location prompt is redisplayed. To end the command, press Enter twice, or press Esc.

How do I use the line command in Autocad?

Follow these steps to use the Line command:

1. Start the Line command by clicking the Line button on the Draw panel on the Ribbon, or by entering L and then pressing Enter.
2. Draw line segments by picking several random points.
3. Terminate the command by pressing Enter, Esc, or the spacebar.

How do you use continuous dimension in Autocad?

Create a Continued or Chain Dimension

1. Click Annotate tab Dimensions panel Continue. Find.
2. If prompted, select the dimension to continue. …
3. Use object snaps to specify additional extension line origins.
4. Press Enter twice to end the command.

How do you set drawing area in Autocad?

To Set the Plot Area

1. Click the layout tab for which you want to set the plot area and adjust the display.
2. Click Output tab Plot panel Page Setup Manager. …
3. In the Page Setup Manager, Page Setups area, select the page setup that you want to modify.
4. Click Modify.

How do you use commands in Autocad?

Enter a Command on the Command Line

1. In the Command prompt text box, type the full command name and press Enter or Spacebar.
2. If automatic command completion is turned on, start typing the command. …
3. Enter the command alias (a shorter, alternate name that is stored in the .

What is Autocad command line?

The command line is docked in the bottom left of the drawing area and displays prompts, options, and messages. The command line is used to input commands, typically by using a keyboard, as an alternative to using the command palette that is in the bottom of the left-side panel.

What is the basic command of Autocad?

Basic actionsSHORTCUT/ COMMANDDESCRIPTIONCO/ COPYCopy objects or textDI/ DISTANCEFind the distance between two point in a drawingI/ INSERTInsert (existing block or drawing as a block)LISTAccess the properties of the different objects within a drawingЕщё 16 строк

How do you set dimension styles in AutoCAD?

To Create a Dimension Style

1. Click Home tab Annotation panel Dimension Style. …
2. In the Dimension Style Manager, click New.
3. In the Create New Dimension Style dialog box, enter a name for the new dimension style, and click Continue.
4. In the New Dimension Style dialog box, click each tab, and make any changes for the new dimension style.

What is continuous dimensioning?

Continous dimensioning breaks one long Dimension into shorter segments that add up to the total measurement. The command is a variation of linear dimensioning in that existing dimensioning is continued or extended. A second Dimension is linked to an existing Dimension to create a dimensioning chain.

Why are my dimensions wrong in AutoCAD?

The units may have been changed from when the drawing was originally created. Check objects for Elevation or Start Z / End Z values (via Properties palette). Dimensioning from 2D to 3D space can throw off values. Reset AutoCAD to defaults (see How to reset AutoCAD to defaults).

Is AutoCAD difficult to learn?

Many people think that learning AutoCAD is hard. It’s not. … But using AutoCAD is not difficult. The key is you need to learn one step at a time.

What is drawing limits in AutoCAD?

Setting Drawing “Limits” The drawing “limits” as defined by AutoCAD is a rectangular area in which you are allowed to draw. This is the area which will be displayed when you “zoom” “all.” It is also the area in which the visible grid and snap grid are extended to.

How do I change the scale of a drawing in AutoCAD?

To Change the Scale of a Drawing View

1. Move the cursor over the drawing view to edit. The drawing view border appears.
2. Click an empty area inside the drawing view. Grips appear.
3. Click the lookup grip. A menu appears.
4. Select the new scale from the menu. The drawing view resizes, using the location of the lookup grip as its base point.

What are the tools of AutoCAD?

The various AutoCAD tools present to assist in drawing a certain part/component, the most basic types used are: Line. Circle. Rectangle.
…
Various AutoCAD Tools

• Line. …
• Circle. …
• Rectangle. …
• Polyline. …
• Trim. …
• Extend. …
• Copy. …
• Mirror.

How do I fix AutoCAD commands?

Perform the following steps in the order listed:

1. Open the drawing file.
2. Purge Registered Applications (from the command line): Type -PURGE. …
3. Type PURGE at the command line. With all checkboxes checked on, click Purge All.
4. Audit and fix any errors: Type AUDIT at the command line. …
5. Save the drawing.

How do I show all commands in AutoCAD?

Do one of the following:

1. Click View tab Palettes panel Command Line. Find.
2. Press Ctrl+9.
3. At the Command prompt, enter COMMANDLINE or COMMANDLINEHIDE.