How do I rotate a section view in Catia?

How do you rotate views in Catia?

In CATIA V5 you also can use the buttons of your mouse and the key to rotate and zoom. To rotate, simultaneously hold down the middle mouse bottom and hold down either the right or left mouse button.

How do I rotate a section view?

Use the Rotate tool to rotate a section view or a scope box.

1. Open the project view that contains the section (callout) or scope box to rotate.
2. Select the section (callout) or scope box.
3. Click Modify tab Modify panel (Rotate).
4. Rotate the view.

How do I change the direction of my section in Catia?

Click to define the section view direction and to position the view on the sheet. Even when the view is generated, you can edit and modify the section profile. To do this, double-click this profile and either invert or replace it.

How do I use section view in Catia?

Creating a Section View

1. Click the Drawing window, and click the Offset Section View icon. from the Views toolbar (Sections subtoolbar).
2. Select the holes and points required for sketching the callout on the view. …
3. Double-click to end the cutting profile creation.

What is a full section view?

Full Section. ∎ In a full section, the cutting plane line. passes fully through the part. ∎ Normally a view is replaced with the full. section view.

How do I Rotate a solid edge view?

To rotate a drawing view around a model edge:

1. Select a linear model edge in a drawing view.
2. Click Tools > Align Drawing View > Horizontal Edge or Vertical Edge. The view rotates until the selected edge is oriented horizontally or vertically.

What is a removed section view?

The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. That’s different than the traditional section view, which is projected parallel to the cutting line.

How do I create an aligned section view in Catia v5?

In the Drawing window, click Aligned Section Cut in the Views toolbar ( Sections sub-toolbar). If desired, you can also click Aligned Section View . Define a profile, by creating one or several lines by creating a point first and then further creating the complete profile. Create the first point of the profile.

How do I create a detail view in Catia?

Creating a Detail View / Detail View Profile

1. In the Drawing window, click Detail View in the Views toolbar ( Details sub-toolbar). …
2. Click the callout center. …
3. Drag to select the callout radius and click a point to end the selection. …
4. Click to generate the detail view.

What is revolved section?

A revolved view is a cross section of an existing view, revolved 90 degrees around a cutting plane projection. You can use a cross section created in the 3D model as the cutting plane, or you can create one on the fly while placing the view.

What is offset section in drawing?

An offset section is a means of including in a single section several features of an object that are not in a straight line. To do this, the cutting plane line is bent, or “OFFSET” to pass through the features of the part.

How do I get the space analysis toolbar in Catia?

Procedure:

1. Go to Tools -> Customize,
2. Select the Tool-bars tab.
3. Select New..,
4. select Assembly Design workbench (left window),
5. and select Space Analysis (right window).

How do you break out a section in Solidworks?

To create a broken-out section:

1. Click Broken-out Section. (Drawing toolbar), or click Insert > Drawing View > Broken-out Section. …
2. Sketch a profile.
3. Set options in the Section View dialog box. …
4. Set options in the Broken-out Section PropertyManager. …
5. Click .