How do I read Ansys Workbench results?

How do I read ANSYS Workbench RST file?

Start Ansys Mechanical APDL, go to /POST1, and use the File command to indicate an RST results file of interest. Use the SET command to read a result of interest—this works for RST files that, by default in APDL, contain element and node data for the model. Go to /PREP7 and use CDWRITE to write a CDB mesh file.

How do you save ANSYS Workbench results?

To do that, go to Workbench>Archive. 120 MB is the maximum file size that you can attach. If the file size exceeds 120 MB, right click on Model or Mesh, and Clear Generated Data, to delete the mesh and the solution from the project. File>Save As a new name and then File>Archive to create a much smaller .

How do I export Ansys results?

apr file of your model and results, perform the following steps:

1. Click File > Save As > Save Simulation Data.
2. The Export Creo Ansys Project dialog box opens. Specify a filename for the archive.
3. Click Export to save the archived . apr file.

What is CDB file Ansys?

The ANSYS CDB format is an archive file, but it is basically an input deck. It can be imported to Simcenter in the same way as an INP file. So just change the file extension to INP and you should be able to import it using File > Import > Simulation.

What is the file format of Ansys file?

The ANSYS input file is an exported file from ANSYS using the CDWRITE command and the input file has an extension ‘cdb’.

How do I Export mesh from Ansys Workbench?

Steps to be followed to get the desired result are:

1. step 1: open the ANSYS workbench and open the file in ANSYS mechanical.
2. step 2: select the solution.
3. step 3: select the solution from the ribbon (From topmost menu)
4. step 4: select write input files from tools.
5. step 5: change save as type to all files.

How do I Export a project from Workbench?

OPTION 1:

1. Open Workbench (in its Configuration Perspective) and find the project in question under the Navigator pane.
2. Right click on the project and click on ‘Export’.
3. Under General, click on ‘Archive File’.

How do I Export Ansys from Workbench?

Use the Export FE Mesh block.

1. Input the Mesh and add the Boundaries in the sets field.
2. Update the Path for Mesh Export.
3. Select the file type as Ansys Mechanical Input (.cdb)

How do I open Ansys student?

The best way to access ANSYS Student is from the start menu:

1. Open the Start menu and select the 16.2 Workbench or All Programs option, then choose the ANSYS 16.2 folder and click Workbench 16.2.
2. The ANSYS Student Workbench 16.2 home page will open. Now you can start using ANSYS Student!

What does P mean in Ansys Workbench?

When you click on the little square box, the letter P appears in the box indicating that you just created a Parameter. You generally want input and output parameters.