How do I make a wall sweep in Revit?

How do I create a custom sweep in Revit?

To create a solid sweep, click (Sweep).

…

1. Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list. …
2. On the Options Bar, use the X, Y, Angle, and Flip options to adjust the position of the profile. …
3. Click Apply.
4. Select the path, and in a 3D view, zoom in to see the profile.

How do you create a wall in Revit?

Add Interior Walls

1. Click Modify tab Modify panel (Split Element).
2. Click on the wall at the location indicated by the short red line in the previous image.
3. On the Modify panel, click (Trim/Extend to Corner).
4. Trim the split wall to create a corridor as shown.

How do you create a wall base in Revit?

Use the Sweep tool to add a baseboard, crown molding, or other type of decorative horizontal or vertical projection to a wall. Open a 3D or elevation view containing the wall to which you want to add the sweep. Click Architecture tab Build panel Wall drop-down (Wall: Sweep).

How do you build a wall?

How to Build a New Wall: Summary

1. Locate the new wall.
2. Attach a top plate to the ceiling framing.
3. Use a plumb bob to position a bottom (“sole”) plate directly beneath the top plate, and nail it to the floor.
4. Install wall studs between the top and bottom plates on 16- or 24-inch centers.