How do I insert a bolt and nut in AutoCAD?

How do you add a nut in AutoCAD?

In this example, the tool for inserting the bolt has the View property set to Side. If the setting is Head or Nut, you are not prompted to perform the first two steps.

…

To Insert Bolt Components.

Where is the shaft generator in AutoCAD?

The Shaft Generator tool is for developing shafts either as standalone parts or within the context of other geometry in an assembly. It is located on the ribbon, Content tab, Shaft panel. Click the large Shaft Generator icon, then select the starting point or click on an existing centerline.

How do I make screw threads in AutoCAD?

To Insert a Thread on a Shaft (AutoCAD Mechanical Toolset)

1. In the Shaft Generator dialog box, select the Thread option.
2. In the Thread Selection dialog box, select the thread type to be inserted.
3. In the corresponding dialog box, you can specify the geometrical values for the section.

How do you draw a threaded hole in AutoCAD 2d?

From the ribbon, Content tab , Holes panel, select Tapped Blind Hole. Select UNC (Regular Thread – Inch), but this time, select the Front view first. Follow the prompts to indicate the starting point, the direction, and the size of the hole. Then drag the size or type a distance, in this case, 1 unit.

How do you draw anchor bolts in Revit?

Place Anchors along a Steel Element

1. Click Steel tab Fabrication Elements panel (Anchors).
2. In the drawing area, select the steel elements to connect. …
3. Select the element face to which the anchor pattern will be perpendicular.
4. Click Modify | Create Anchor tab Draw panel and select either:

How do you draw a screw step by step?

How to Draw a Screw

1. At first we sketch out two lines in the form of the capital letter T. …
2. With the help of simple oval draw out the head of the screw. …
3. Using two crossing lines draw out the drive on the top of the head. …
4. Now accurately draw out the drive and thread of the screw using dark and smooth lines.