How do I fix a part in a Solidworks assembly?

How do you lock a part in place in Solidworks assembly?

Locking and Breaking External References

1. In the FeatureManager design tree: For an individual item, right-click the feature, component, body, or part. …
2. Click External References. …
3. To modify external references, select the external references and click Break Selected, Lock Selected, or Unlock Selected. …
4. Click OK.

What does fixing a component do in an assembly?

It is recommended that at least one assembly component is either fixed, or mated to the assembly planes or origin. This gives a frame of reference for all other mates, and helps prevent unexpected movement of components when mates are added. A fixed component has a (f) before its name in the FeatureManager design tree.

Can you edit a part in an assembly solidworks?

To edit a part while in an assembly: Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. The title bar shows the name of the part in the assembly that is open for editing as in .

How do you update a part in a Solidworks assembly?

To update an assembly:

1. In SOLIDWORKS, open an assembly previously built by CircuitWorks.
2. In CircuitWorks, make the component changes or open a new ECAD file containing the changes.
3. Click Build Model (Tools toolbar).
4. In the dialog box, click Yes to update the open assembly. …
5. To update the SOLIDWORKS assembly, do one:

What does the lock mate do in Solidworks?

A Lock mate maintains the position and orientation between two components. The components are fully constrained relative to each other. A Lock mate has the same effect as forming a subassembly between the two components and making the subassembly rigid.

How do you fix components?

There are two ways of fixing a component: by fixing its position according to the geometrical origin of the assembly, which means setting an absolute position. This operation is referred to as “Fix in space”. by fixing its position according to other components, which means setting a relative position.

How do you ground a part in Solidworks?

To define a ground plane:

1. In an assembly, click Insert > Reference Geometry > Ground Plane.
2. In the PropertyManager, in Ground Plane, select a face in the assembly.
3. (Optional.) Click Reverse Direction , or click the handle in the graphics area.
4. Click . Ground Plane appears in the FeatureManager design tree.

How do you un fix something in Solidworks?

To change the fix or float, go to featuremanager deign tree. Select and right click on the component’s name for changing the fix or float condition. Select fix or float from the appearing menu as per your requirement.

How do you edit an assembly in Solidworks?

Edit Assembly

1. Click Open (Standard toolbar) or File > Open.
2. In the dialog box, select an assembly, and then in Mode, select Large Design Review.
3. Select Edit Assembly.
4. Click Open. An eye overlay appears on the icons of all components indicating that the assembly is in Large Design Review mode.

Can you scale parts in assembly solidworks?

In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.

How do you replace a part in an assembly?

To replace one or more components:

1. Do one of the following: Click Replace Components (Assembly toolbar). Click File > Replace. …
2. Set options as described below, then click . The selected component instances are replaced. If you chose Manually select, choose the configuration to open in the Configurations dialog box.

How do I edit a step in Solidworks 2020?

You need to add a feature to the imported body.

1. Select the bottom face of the imported body.
2. Click Chamfer . …
3. Under Chamfer Parameters, make the desired settings and click OK . …
4. Right-click Imported1 in the FeatureManager design tree and select Edit Feature. …
5. Click OK. …
6. Select the STEP file and click Open.