How do I edit a hole in SolidWorks?

How do you edit a hole in a table in SolidWorks?

Adding Holes to a Table

1. Right-click the hole table in the FeatureManager design tree and select Edit Feature.
2. Click in Edges/Faces, then select the holes in the graphics area. You may have to click Rebuild. (Standard toolbar) or Edit > Rebuild to update the table.

How do I change the diameter of a hole in SolidWorks?

To change the diameter, depth, or type of the hole, right-click the hole feature in the model or the FeatureManager design tree, and select Edit Feature. Make the necessary changes in the PropertyManager, and click OK .

How do you edit a hole in a table?

To Modify a Hole Table

1. Right-click a hole table in the drawing and select Edit Hole Table to display the Edit Hole Table dialog box.
2. On the Format tab, change the table title, formatting, and text styles.
3. Right-click a Property name, and choose Format Column to display the Format Column dialog box.

How do I change the depth of a hole in SolidWorks?

To change the dimensions of the countersink, you should specify Countersink during Find. For Tap holes and PipeTap holes, you can change the Depth, Tap Drill Diameter & Angle, and Thread Depth. For Legacy holes, you can change the parameters that are appropriate to the type of hole you specify during Find.

How do I insert a hole in a table in Solidworks?

Creating a Hole Table

1. Click Hole Table. …
2. In the PropertyManager, set options.
3. In the graphics area, select a vertex to specify the Origin. …
4. Select hole edges, or select a model face to include all cut loops within the face boundary.

How do you cut a hole in Solidworks?

Creating a Simple Hole

1. Select a planar face on which to create the hole.
2. Click Simple Hole (Sheet Metal toolbar) or Insert > Features > Simple Hole.
3. In the PropertyManager, set the options.
4. Click OK to create the simple hole.

How do you call a tapped out hole?

To add a hole callout:

1. Click Hole Callout (Annotation toolbar), or click Insert > Annotations > Hole Callout. …
2. Click the edge of a hole, then click in the graphics area to place the hole callout. …
3. Edit the callout in the Dimension PropertyManager. …
4. Repeat steps 2 through 4 to insert additional hole callouts, then click .

How do I make a hole table in Inventor?

Add a hole table for all holes in a view

1. On the ribbon, click Annotate tab Table panel Hole, click the arrow next to the Hole command, and then select Hole View. …
2. In the graphics window, select the drawing view.
3. Click a point to place the origin indicator for the hole table.
4. Click to place the hole table.

How do I make a hole table in Creo?

See Criteria to Include Holes and Cuts in a Hole Table before you proceed.

1. Open a drawing.
2. On the Table tab, click Hole Table. …
3. Define the type of hole table to create. …
4. Use the Table columns area to customize the columns in the hole table.

How do you make a dowel hole in Solidworks?

To insert the dowel hole:

1. Click Hole Wizard. (Features toolbar).
2. In the Type tab of the PropertyManager: Under Hole Type, click Hole. . In Type, select Dowels. Set the remaining options as needed.
3. Click .

What is a hole tap?

Tapping a hole is the process of creating threads on the sides of a drilled hole to enable screwing in a bolt or machine screw. This instructable will focus on primarily the use of taper taps, although there will be some mentioning of bottoming taps.