How do I cut part of a Solidworks assembly?

How do you extract parts from an assembly in SolidWorks?

To specify the export options: Click Tools > Options > System Options > Export. For File Format, select SLDPRT from assembly.

How do you cut parts in SolidWorks?

Surface Cut

1. Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. …
2. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface.
3. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies.

How do I cut an assembly in half in SolidWorks?

To split bodies:

1. Click Split (Features toolbar) or Insert > Features > Split.
2. In the PropertyManager, set the options. …
3. Under Resulting Bodies, select the bodies to save under , or click Auto-assign Names. …
4. Double-click the body name under File, type a name for the new part in the dialog box, then click Save. …
5. Click .

Can you edit a part in an assembly SolidWorks?

To edit a part while in an assembly: Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. The title bar shows the name of the part in the assembly that is open for editing as <part_name> in <assembly_name> .

How do you save an individual part from an assembly in Solidworks?

In an assembly, in the graphics area or FeatureManager design tree, right-click a component or Ctrl + select multiple components and click Make Independent . In the dialog box, click OK when asked to save the component with a new name. In the Save As dialog box, type a name and click Save.

Can you save a Solidworks assembly as a part?

To open the Save Assembly as Part PropertyManager: In an assembly, click File > Save As. Select Part (*.

How do you cut part of an assembly?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

Can you extrude cut in assembly?

You can create extruded and revolved cut features in assemblies. To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut.

How do you use surface trim?

To trim a surface:

1. Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face.
2. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.
3. In the PropertyManager, under Trim Type, select a type:

Can you scale parts in assembly solidworks?

In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.

How do you edit an assembly in Solidworks?

Edit Assembly

1. Click Open (Standard toolbar) or File > Open.
2. In the dialog box, select an assembly, and then in Mode, select Large Design Review.
3. Select Edit Assembly.
4. Click Open. An eye overlay appears on the icons of all components indicating that the assembly is in Large Design Review mode.

How do I replace a part in a Solidworks assembly?

To replace one or more components:

1. Do one of the following: Click Replace Components (Assembly toolbar). Click File > Replace. …
2. Set options as described below, then click . The selected component instances are replaced. If you chose Manually select, choose the configuration to open in the Configurations dialog box.