How do I create a circular pattern in Catia Assembly?

How do you draw a circular pattern in CATIA?

CATPart document.

1. Click Circular Pattern .
2. Select the element you wish to replicate as a pattern. …
3. Click the Reference element field and select a direction to specify the first direction of creation.
4. Define the Axial Reference by choosing the Parameters type:
5. Click OK to create the pattern.

What are circular patterns?

Use circular patterns to create multiple instances of one or more features that you can space uniformly around an axis. Pattern instances inherit the feature color of the original feature when the: Pattern is based on one feature.

Is it possible to create a new part in assembly mode in CATIA?

6.2.3 Inserting a New Part



select Product1 and click the New Part icon . If geometry exists in the assembly, the New Part: Origin Point dialog box is displayed, proposing two options to locate the part: Click Yes to locate the part origin point on a selected point, on another component for example.

How do you make a cylinder in CATIA?

Creating Cylindrical Surfaces

1. Click Cylinder . …
2. Select the Point that gives the center of the circle to be extruded and specify the desired Direction of the cylinder axis. …
3. Select the Radius of the cylinder.
4. Enter values or use the graphic manipulators to define the start and end limits of the extrusion.

How do I make a curved pattern?

To create a curve driven pattern:

1. Create a part that includes a feature you want to pattern along a curve.
2. Click Curve Driven Pattern (Features toolbar) or Insert > Pattern/Mirror > Curve Driven Pattern.
3. In the PropertyManager, set the options.
4. Click .

When analyzing a component Catia says it has 6 degrees of freedom What is the meaning of that?

Six degrees of freedom (6DOF) refers to the freedom of movement of a rigid body in three-dimensional space.

How do you make a circle on shape?

To sketch a circle from the center outward, first select the center point circle sketch tool. Click on the point location where you want the center of the circle to be located, and then click on another location to set the radius for the circle.

How do I create a circular pattern in Solidworks assembly?

You can create a circular pattern of components in an assembly. To create a circular pattern of components: Click Linear Component Pattern > Circular Component Pattern (Assembly toolbar) or Insert > Component Pattern > Circular Pattern.

How do you separate parts from assembly in Catia?

In this case, you just need to select the existing assembly split, click the Assembly Split icon and then select a face. Only the Assembly Features Definition dialog box appears to let you determine the parts of interest.

What does the F1 button do in Catia?

38 Shortcuts for CATIA V5

Which is one of the approaches for creating assembly in Catia?

In CATIA you can create assembly models by adopting two types of approaches. The first design approach is the bottom-up approach, and the second one is the top-down approach. Both these design approaches are discussed below. The bottom-up assembly is the most preferred approach for creating assembly models.

How do you make a hollow cylinder in Catia?

Steps

1. Click Solid > Create > Create Sketch .
2. Select the XZ plane to sketch on. …
3. Click Sketch > Create > Center Diameter Circle .
4. Hover over the origin (or center) of the sketch. …
5. Click once to begin placing the circle.
6. Drag the mouse away from the center to start sketching a circle. …
7. Click again to complete the circle.