How do I change the view range in Revit family?

How do I change my family View range?

When working in the family editor you may need to adjust the “View Range” for the view you’re working in. In the project browser select the view bold text for the name of the view and then in the properties palette notice the change to the view properties. Scroll down to view range and then edit as needed.

How do I change the view range in Revit?

Modify the View Range

1. Open a plan view.
2. On the Properties palette, locate the View Range parameter, and click Edit. Alternatively, enter VR on the keyboard.
3. In the View Range dialog, modify view range properties as necessary. …
4. Click Apply to view changes.

How do you edit a family view in Revit?

Modify Families in a Project (or Nested Family)

1. Double-click an instance of the family in the drawing area.
2. Select an instance of the family in the drawing area, and click Modify <Element> tab Mode panel (Edit Family).
3. In the drawing area or the Project Browser (under Families), right-click the family, and click Edit.

Why can I see the level below in Revit?

Follow these steps: In plan view, click View menu > View Properties. Click the Edit button for the View Range parameter. Enter a value for both the Bottom Offset, under Primary Range, and the Level Offset, under View Depth, that is more than 4 feet from the floor or slab.

Why is my view range greyed out in Revit?

In your case you seem to have a view template assigned to your view. This (can) cause different settings to be grayed out because it is controlled by the view template. You can solve it by removing the view template from the view (set it to <none> )or modify the view template.

What is Revit plan view?

The structural plan view is the default view when you start a new project using a structural template. … Revit provides for this variation with the View Direction type parameter for structural plans.

Is there a Revit viewer?

To open and review models without an active license, you can run Revit in viewer mode. Revit Viewer is intended for reviewing models and printing views and sheets without the need for a software license or subscription.

How do I turn off underlay in Revit?

Define Halftone/Underlay Settings

1. Click Manage tab Settings panel Additional Settings drop-down (Halftone/Underlay).
2. In the Halftone/Underlay dialog, under Underlay, define the following settings: …
3. Under Halftone, for Brightness, enter a value or use the slider to specify a setting between Light and Dark. …
4. Click OK.

How do I use underlay in Revit?

Create an Underlay

1. In the Project Browser, open a plan view.
2. On the Properties palette, for Range: Base Level, select the level you want to underlay. Range: Top Level is automatically set to one level above the Base Level. …
3. On the Properties palette, for Underlay Orientation, select Look Up or Look Down.