How do I change the length of a line in Solidworks?

How do I shorten a line in SOLIDWORKS?

Right-click on an existing section view or its cutting line and click Edit Cutting Line. For some complex section views created with SOLIDWORKS 2013, you must select an insertion point before you can modify them.

How do I stretch a line in SOLIDWORKS?

Stretching Sketch Entities

1. Click Base point. and then click on the sketch to set a base point.
2. Drag to stretch the sketch entities. When you release, the entities stretch to that point and the PropertyManager closes.

How do you fix lengths in SOLIDWORKS?

To set a fixed length: Right-click the route in the FeatureManager design tree and click Edit Route . In the graphics area, right-click a route segment and click Fixed Length . You can also access this command by clicking Tools > Routing > Routing Tools > Fixed Length .

How do you change the dimension of a linetype in SOLIDWORKS?

To apply a style to a dimension or annotation:

1. Select one or more dimensions or annotations.
2. In the PropertyManager or dialog box, select a style in Set a current Style.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

How do you use the Flex feature in Solidworks?

To create Flex features, click Flex (Features toolbar) or Insert > Features > Flex, set the PropertyManager options, and click .

…

Repositioning the Triad and Trim Planes

1. Select a coordinate system feature .
2. Change the Rotation Origin. , …
3. Change the Rotation Angle , , or to rotate the triad around these axes.

How do I use the Deform tool in Solidworks?

To open the Deform PropertyManager with Surface Push options:

1. Click Deform. on the Features toolbar, or click Insert > Features > Deform.
2. In the PropertyManager, under Deform Type, select Surface Push.

Where is sketch entities in Solidworks?

(Sketch toolbar) or Tools > Sketch Tools > Move. Click Copy Entities. (Sketch toolbar) or Tools > Sketch Tools > Copy. Right-click to display the Sketch shortcut menu, click Sketch Tools, and click Move Entities or Copy Entities.

How do I make dimension lines thinner in SOLIDWORKS?

To set line thickness:

1. In a drawing, click Tools > Options > Document Properties > Line Thickness.
2. In the dialog box, under Line thickness print settings, enter a value for the line weights (Thin, Normal, Thick, and five additional line thickness settings). …
3. Click OK.