How do I change the depth of extrusion in Solidworks?

How do I change the extruded dimension in Solidworks?

Double click the (extruded, revolved, etc.) part, then change the dimensions that’ll appear. 2. Click on the arrow before the (extrusion, revolve, etc.)

How do you edit cut extrude?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.

How do you extrusion in Solidworks?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.

How do I change dimension values in SOLIDWORKS?

To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel , mouse wheel, or by typing in the dimension box.

How do I change dimension properties in SOLIDWORKS?

In a drawing, click Options (Standard toolbar), select Document Properties, and then select Dimensions.

How do you change the direction of extrusion in Solidworks?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears. Edit the properties in the Base Extrude PropertyManager.

What is extruded boss in Solidworks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

How do you remove material Extrude in Solidworks?

Select the end condition. Select a plane to define an extrude direction normal to the plane. To remove the faces defining the extrude from the model after extruding, click Delete original faces.

How do you change materials in Solidworks?

Editing a Custom Material

1. In a part document, right-click Material in the FeatureManager design tree and select Edit Material.
2. In the material tree, browse to a custom library and select a custom material.
3. Edit properties of the material, then click Save.

What are the options used in extrude to define depth?

Blind—Extrudes a section from the sketching plane to the specified depth value. Specifying a negative depth value flips the depth direction. Symmetric—Extrudes a section on each side of the sketching plane by half of the specified depth value. To Next—Extrudes a section to the next surface of a solid.

How do you use the lofted boss base in Solidworks?

How to create a Lofted Boss/Base in SolidWorks:

1. Sketch your profiles. A minimum of two are required but a higher number of profiles allows you to create more complex shapes. …
2. Select the Loft Feature, then choose the profiles in order. …
3. Adjust the Constraints and options as required.