How do I change the coordinate system in Solidworks drawing?

How do you change the coordinate system for sketch in SolidWorks?

To change the coordinate system for your 3D sketch, click the desired sketch tool, hold down the Ctrl key, and click a plane, a planar face, or a user-defined coordinate system.

How do you move the XYZ axis in SolidWorks?

Select a component and drag in the X, Y, or Z direction of the assembly. The coordinate system appears in the graphics area to help orient you. To select the axis you want to drag along, click near that axis before dragging. Select an entity, then select a component to drag along that entity.

How do you show XYZ coordinates in SolidWorks?

Right-click the coordinate system and click Hide or Show.

…

Click one of the following:

1. Hide/Show Items (Heads-up View toolbar), and then View Coordinate Systems.
2. View Coordinate Systems (View toolbar)
3. View > Hide/Show > Coordinate Systems.

How do I change the axis in SolidWorks?

Article

1. Press Space to bring up the View Orientation window, or right-click the graphics view and choose View Orientation.
2. Choose the desired option from the Up Axis Flyout (shown below) Specifying the Up axis.
3. Try out the new orientations. Any existing drawing views will also be updated.

How do you change the front view in SOLIDWORKS?

Changing the Orientation of the Standard Model Views

1. Do one of the following: Use the Rotate, Zoom, and Pan tools to orient the model. Click View Selector and select a view. …
2. Click Update Standard Views .
3. When prompted, select the standard view you want to assign the current view to.
4. Click Yes to confirm the update.

What is the coordinate system in SOLIDWORKS?

You can define a coordinate system for a part or assembly. Coordinate systems are useful: With the Measure and Mass Properties tools. When exporting SOLIDWORKS documents to IGES, STL, ACIS, STEP, Parasolid, VRML, and VDA. When applying assembly mates.

How do you change isometric view in SolidWorks?

To change the orientation of a section or aligned section view to isometric: Right-click a section or aligned section view and select Isometric Section View. To remove the isometric orientation, right-click the view and select Remove Isometric View.

How do you read coordinates on a drawing?

To mark coordinates using degrees, minutes, seconds – it is generally accepted that the latitude should be written first followed by longitude. The latitude degrees should be two digits and the longitude three digits (i.e. 08°14’16” 128°34’32”).

How do I find the coordinates of a point in Solidworks?

Click Tools > Inquiry > Get Coordinate (or type GetXY). In the graphics area, select the point to identify.

How do I trace a point in Solidworks?

You can trace the path of motion of a point in an assembly.

1. From a Motion Analysis study, click Results and Plots. …
2. In the PropertyManager under Result, for Category, select Displacement/Velocity/Acceleration.
3. For Subcategory, select Trace Path.
4. Select a point or vertex on the assembly.